Açıklama

G70D-VSOC16 / VFOM16

G70D; Kullanımı kolay, Yer tasarrufu sağlayan 16 noktalı Çıkış terminali

İnce klemens sadece 135 × 40 mm’dir (G × D).
Bağımsız kontaklar ve kısa çubuklar sık kullanılan bağlantıların kolayca yapılmasını sağlar.
Enerji iletim hattı bağlantıları için bir Genişletme Klemensi takılabilir.
M3.5 çatal tipi sıkıştırmalı terminaller (maksimum 6,2 mm terminal genişliğiyle) kullanılabilir.
Kol mekanizması Rölelerin alet kullanmadan kolayca takılmasını ve çıkarılmasını sağlar.
Röle modelleri ve güç MOSFET Rölesi modelleri mevcuttur.
Çalışma göstergeleriyle donatılmıştır.
DeviceNet bağlantısı için DRT2-OD32ML G/Ç Terminali veya CompoBus/S bağlantısı için SRT2-VOD16ML Konnektör Terminali ile birleştirilebilir.
Dahili diyot, bobin şok dalgasını emer.
DIN rayına takın ya da vidalı montaj yapın.

Özellikler ve sipariş bilgisi

Ordering Information

Relay Terminals

Classification	Points	Internal I/O common	Rated voltage	Order code
Relay outputs	16 points (SPST-NO × 16)	NPN (+common)	24 V DC	G70D-VSOC16
Power MOSFET relay outputs	16 points (SPST-NO × 16)	NPN (+common)	24 V DC	G70D-VFOM16

Note:These are all non-standard model and require a special order. Contact your OMRON representative for details on availability.

Accessories (Order Separately)

Cables for I/O Relay Terminals XW2Z-R

Type			Order code
Cable with Loose Wire and Crimp Terminals			XW2Z-RY⬜C
Cable with Loose Wires			XW2Z-RA⬜C
Cable with connectors	Fujitsu connectors	1:1	XW2Z-R⬜C
		1:2	XW2Z-RI⬜C-⬜
		1:2	XW2Z-RO⬜C-⬜
		1:3	XW2Z-R⬜C-⬜-⬜
	MIL connectors	1:1	XW2Z-RI⬜C
		1:1	XW2Z-RO⬜C
		1:2	XW2Z-RI⬜-⬜-D⬜
			XW2Z-RM⬜-⬜-D⬜
			XW2Z-RO⬜-⬜-D1

Relay Terminal

Appearance	Applicable Output Relay Terminals	Order code
	G70D-VSOC16	G70D-ET 2
	G70D-VFOM16	G70D-ET 2

Short Bar

Appearance	Applicable Output Relay Terminals	Order code
	G70D-VSOC16	G6D-4-SB
	G70D-VFOM16	G6D-4-SB

Replacement Relays

Applicable Output Relay Terminals	Rated voltage	Order code
G70D-VSOC16	24 V DC	G6D-1A-ASI-AP DC24 2
G70D-VFOM16	24 V DC	G3DZ-2R6PL DC24 2

Accessories for DIN Track Mounting

Refer to your OMRON website for details on the PFP-⬜.

Specifications

Relay Specifications

The following specifications apply to G6D Relays mounted in a G70D Relay Terminal and not the G6D Relay itself.

Coil Ratings (per G6D Relay)

Rated voltage	24 VDC
Rated current	10.5 mA
Coil resistance	2,880 Ω
Must-operate voltage	70% max. of rated voltage
Must release voltage	10% min. of rated voltage
Max. voltage	130% of rated voltage
Power consumption	Approx. 200 mW

Note:

The must-operate voltage is 75% or less of the rated voltage if the relay is mounted upside down.
Rated current and coil resistance were measured at a coil temperature of 23° C with a tolerance of ±10%.
Operating characteristics were measured at a coil temperature of 23° C.
The maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply. There is no continuous allowance.
The rated current includes the terminal’s LED current.

Contact Ratings (per G6D Relay)

Load		Resistive load (cosφ = 1)
Rated load		3 A at 250 VAC, 3 A at 30 VDC
Rated carry current		5 A 2
Max. switching voltage		250 VAC, 30 VDC
Max. switching current		5 A
Max. switching capacity (reference value)		1,250 VA, 150 W
Min. permissible load (reference value) 2		5 VDC, 1 mA
Endurance	Electrical	100,000 operations min. (under and at the rated load at 1,800 operations/h)
	Mechanical	20,000,000 operations min. (at 18,000 operations/h)

Power MOSFET Relay Specifications

The following values apply to G3DZ Relays mounted in a G70D Output Block and not the G3DZ Relay itself.

Input (per G3DZ Power MOSFET Relay)

Rated voltage		24 VDC
Operating voltage		19.2 to 28.8 VDC
Voltage level	Must-operate	19.2 VDC max.
	Must release	1 VDC min.
Input impedance		4 kΩ±20%
Rated current		8.2 mA±20%

Note:The rated current includes the current consumption of the operation indicator.

Output (per G3DZ Power MOSFET Relay)

Load voltage	3 to 264 VAC, 3 to 125 VDC
Load current	100 μA to 0.3 A
Inrush current	6 A (10 ms)

Characteristics

Item	G70D-VSOC16	G70D-VFOM16
Item	Relay outputs	Power MOSFET Relay outputs
Contact configuration	16 points (SPST-NO × 16)
Contact structure	Single	–
Contact resistance	100 mW max. 2	–
Isolation method	–	Photocoupler
Must-operate time	10 ms max. 2	10 ms max.
Release time	10 ms max. 2	15 ms max.
Output ON-resistance	–	2.4 W max.
Open-circuit leakage current	–	10 mA max. (at 125 V DC)
Max. switching frequency	Mechanical: 18,000 operations/h Rated load: 1,800 operations/h	–
Insulation resistance	100 MW min. (at 500 V DC)
Dielectric strength	2,000 V AC for 1 min between coil and contact	2,000 V AC for 1 min between input and output terminals
Noise immunity	Power input (normal mode): 600 V for 10 min with a pulse width of 100 ns to 1 ms Power input (common mode): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms Input cable (coiling): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms Unit body (coiling): 600 V for 10 min with a pulse width of 100 ns to 1 ms
Vibration resistance	Destruction: 10 to 55 to 10 Hz, 0.5-mm amplitude (1.0-mm double) Malfunction: 10 to 55 to 10 Hz, 0.375-mm amplitude (0.75-mm double)
Shock resistance	Destruction: 300 m/s2, Malfunction: 100 m/s2
Operating voltage range	24 V DC +10%/–15%
Current consumption	Approx. 170 mA at 24 V DC 2	Approx. 125 mA at 24 V DC 2
Cable length	Between block and controller: 5 m max. (reference value for AWG28) Between block and external device: Dependent on load
LED color	Operation indicator: orange
Coil surge absorber	Diode (600 V, 1 A)
Ambient temperature	Operating: -25 to 55°C (with no icing or condensation)
Ambient humidity	Operating: 45% to 85%
Mounting strength	No damage when 49 N pull load was applied for 1 s in all directions (except for 9.8 N in direction of rail)
Terminal strength	Tightening torque: 0.78 to 118 N·m Pull strength: 49 N for 1 min
Weight 2	Approx. 280 g

Note:These values are initial values.

G70D

Açıklama

G70D-VSOC16 / VFOM16

Özellikler ve sipariş bilgisi

Ordering Information

Relay Terminals