Omron Xpectia FH

Satışla iletişime geçin

(0216) 540 59 91

Fiyat Teklifi İsteyin

Açıklama

Tıpkı insan gözü gibi ve hatta, insan gözünden bile iyi

  • Çeşitli uygulamalar için eksiksiz bir kamera serisi
  • Hızlı ve hassas denetim ve ölçüm için güçlü kontrolörler
  • Çeşitli ölçümlerin kolay ayarlanmasına yönelik yazılım



Özellikler ve sipariş bilgisi

FH Series Sensor Controllers

ItemCPUNo. of camerasOutputOrder code
Omron Xpectia FHHigh-speed,
Large-capacity Controller
Intel® Core™ i7 processor 4 cores2NPN/PNPFH-5050
4NPN/PNPFH-5050-10
8NPN/PNPFH-5050-20
Intel® Celeron® processor 2 cores2NPN/PNPFH-2050
4NPN/PNPFH-2050-10
8NPN/PNPFH-2050-20
Standard ControllerIntel® Core™ i7 processor 4 cores2NPN/PNPFH-3050
4NPN/PNPFH-3050-10
8NPN/PNPFH-3050-20
Intel® Celeron® processor 2 cores2NPN/PNPFH-1050
4NPN/PNPFH-1050-10
8NPN/PNPFH-1050-20
Omron Xpectia FHBox-type controllersIntel® Atom® processor 2 cores2NPN/PNPFH-L550
4NPN/PNPFH-L550-10

Cameras

ItemLens mountDescriptionsColor/
Monochrome
Image
Acquisition
Time

Order code
Omron Xpectia FHDigital CMOS
Cameras
(Lens required)
C mount20.4 million pixels
(Supported controller:
FH-5050(-⬜)/2050(-⬜)
Series)

Color42.6 ms

FH-SC21R
MonochromeFH-SM21R
High-speed Digital
CMOS Cameras
(Lens required)
C mount12 million pixels

Color24.9 ms

FH-SCX12
MonochromeFH-SMX12
5 million pixelsColor10.3 ms

FH-SCX05
MonochromeFH-SMX05
Omron Xpectia FH400,000 pixelsColor1.9msFH-SCX
MonochromeFH-SMX
Omron Xpectia FHHigh-speed Digital
CMOS Cameras
(Lens required)
M42 mount12 million pixels

Color25.7 ms

FH-SC12
MonochromeFH-SM12
Omron Xpectia FHHigh-speed Digital
CMOS Cameras
(Lens required)
C mount4 million pixelsColor8.5 ms

FH-SC04
MonochromeFH-SM04
2 million pixelsColor4.6 ms

FH-SC02
MonochromeFH-SM02
Omron Xpectia FH300,000 pixelsColor3.3 msFH-SC
MonochromeFH-SM
Omron Xpectia FHDigital CMOS
Cameras
(Lens required)
C mount5 million pixelsColor71.7msFH-SC05R
MonochromeFH-SM05R
Omron Xpectia FH5 million pixelsColor38.2 msFZ-SC5M3
MonochromeFZ-S5M3
Omron Xpectia FHDigital CCD
Cameras
(Lens required)
C mount5 million pixelsMonochrome62.5 msFZ-S5M2
2 million pixelsColor33.3 msFZ-SC2M
MonochromeFZ-S2M
Omron Xpectia FH300,000 pixelsColor12.5 msFZ-SC
MonochromeFZ-S
Omron Xpectia FHHigh-speed Digital
CCD Cameras
(Lens required)
C mount300,000 pixelsColor4.9 msFZ-SHC
MonochromeFZ-SH
Omron Xpectia FHSmall Digital
CCD Cameras
(Lens required)
Lenses for
small camera
required
300,000-pixel flat typeColor12.5 msFZ-SFC
MonochromeFZ-SF
Omron Xpectia FH300,000-pixel pen typeColor12.5 msFZ-SPC
MonochromeFZ-SP
Omron Xpectia FHIntelligent
Compact Digital
CMOS Camera
Built-in lensNarrow viewColor16.7 msFZ-SQ010F
Standard viewColorFZ-SQ050F
Omron Xpectia FHWide View (long-distance)ColorFZ-SQ100F
Wide View (short-distance)ColorFZ-SQ100N

Frame rate

ModelFH-SM02
FH-SC02
FH-SM04
FH-SC04
FH-SM12
FH-SC12
FH-SMX
FH-SCX
FH-SMX05
FH-SCX05
FH-SMX12
FH-SCX12
FH-SM21R
FH-SC21R
Image
Acquisition
Time

2 Cables

High Speed Mode

4.6 ms8.5 ms25.7 ms10.3 ms24.9 ms42.6 ms
Standard Mode9.7 ms17.9 ms51.3 ms22.1 ms53.5 ms90.1 ms
1 CableHigh Speed Mode

9.2 ms17.0 ms51.3 ms1.9 ms20.6 ms50.0 ms83.3 ms
Standard Mode19.3 ms35.8 ms102.0 ms3.8 ms44.1 ms106.4 ms175.4 ms

Camera Cables

ItemDescriptionsOrder code

Omron Xpectia FHCamera Cable
Cable length: 2 m, 3 m, 5 m, or 10 m

FZ-VS3 ⬜M
Omron Xpectia FHBend resistant Camera Cable
Cable length: 2 m, 3 m, 5 m, or 10 m

FZ-VSB3 ⬜M
Omron Xpectia FHRight-angle Camera Cable *1
Cable length: 2 m, 3 m, 5 m, or 10 m

FZ-VSL3 ⬜M
Omron Xpectia FHBend resistant Right-angle Camera Cable

Cable length: 2 m, 3 m, 5 m, or 10 m

FZ-VSLB3 ⬜M
Omron Xpectia FHLong-distance Camera Cable
Cable length: 15 m

FZ-VS4 15M
Omron Xpectia FHLong-distance Right-angle Camera Cable

Cable length: 15 m

FZ-VSL4 15M
Omron Xpectia FHCable Extension Unit
Up to two Extension Units and three Cables can be connected.
(Maximum cable length: 45 m

)

FZ-VSJ

Cameras / Cables Connection Table

Camera CablesModelCable
length
High-speed Digital CMOS cameras
300,000-pixel2 million-pixel4 million-pixel12 million-pixel
FH-SM/SCFH-SM02/SC02FH-SM04/SC04FH-SM12/SC12
High speed
mode of
transmission
speed select
Standard
mode of
transmission
speed select
High speed
mode of
transmission
speed select
Standard
mode of
transmission
speed select
High speed
mode of
transmission
speed select
Standard
mode of
transmission
speed select
Camera Cables
Right-angle
camera cables
FZ-VS3
FZ-VSL3
2 mYesYesYesYesYesYesYes
3 mYesYesYesYesYesYesYes
5 mYesYesYesYesYesYesYes
10 mYesNoYesNoYesNoYes
Bend resistant
camera cables
Bend resistant
Right-angle
Camera Cable
FZ-VSB3
FZ-VSLB3
2 mYesYesYesYesYesYesYes
3 mYesYesYesYesYesYesYes
5 mYesYesYesYesYesYesYes
10 mYesNoYesNoYesNoYes
Long-distance
camera cable
Long-distance
right-angle
camera cable
FZ-VS4
FZ-VSL4
15 mYesNoYesNoYesNoYes
Camera CablesModelCable
length
High-speed Digital CMOS cameras
400,000-pixel5 million-pixel12 million-pixel
FH-SMX/SCXFH-SMX05/SCX05FH-SMX12/SCX12
High speed mode of
transmission speed
select
Standard mode of
transmission speed
select
High speed mode of
transmission speed
select
Standard mode of
transmission speed
select
High speed mode of
transmission speed
select
Standard mode of
transmission speed
select
Camera Cables
Right-angle
camera cables
FZ-VS3
FZ-VSL3
2 mYesYesYesYesYesYes
3 mYesYesYesYesYesYes
5 mYesYesYesYesYesYes
10 mNoYesNoYesNoYes
Bend resistant
camera cables
Bend resistant
Right-angle
Camera Cable
FZ-VSB3
FZ-VSLB3
2 mYesYesYesYesYesYes
3 mYesYesYesYesYesYes
5 mYesYesYesYesYesYes
10 mNoYesNoYesNoYes
Long-distance
camera cable
Long-distance
right-angle
camera cable
FZ-VS4
FZ-VSL4
15 mNoYesNoYesNoYes
Camera CablesModelCable
length
Digital CMOS CameraDigital CCD cameras
5 million-pixel20.4 million-pixel5 million-pixel300,000-pixel2 million-pixel5 million-pixel
FH-SM05R/SC05RFH-SM21R/SC21RFZ-S5M3/SC5M3FZ-S/SCFZ-S2M/SC2MFZ-S5M2
High speed mode
of transmission
speed select
Standard mode
of transmission
speed select
Camera Cables
Right-angle
camera cables
FZ-VS3
FZ-VSL3
2 mYesYesYesYesYesYesYes
3 mYesYesYesYesYesYesYes
5 mYesYesYesYesYesYesYes
10 mYesNoYesNoYesYesNo
Bend resistant
camera cables
Bend resistant
Right-angle
Camera Cable
FZ-VSB3
FZ-VSLB3
2 mYesYesYesYesYesYesYes
3 mYesYesYesYesYesYesYes
5 mYesYesYesYesYesYesYes
10 mYesNoYesNoYesYesNo
Long-distance
camera cable
Long-distance
right-angle
camera cable
FZ-VS4
FZ-VSL4
15 mYesNoYesNoYesYesNo
Camera CablesModelCable
length
Small digital CCD cameras Pen type/flat typeHigh-speed Digital CCD camerasIntelligent Compact Digital CMOS Camera
FZ-SF/SFC FZ-SP/SPCFZ-SH/SHCFZ-SQ⬜
Camera Cables
Right-angle
camera cables
FZ-VS3
FZ-VSL3
2 mYesYesYes
3 mYesYesYes
5 mYesYesYes
10 mYesYesYes
Bend resistant
camera cables
Bend resistant
Right-angle
Camera Cable
FZ-VSB3
FZ-VSLB3
2 mYesYesYes
3 mYesYesYes
5 mYesYesYes
10 mYesYesYes
Long-distance
camera cable
Long-distance
right-angle
camera cable
FZ-VS4
FZ-VSL4
15 mYesYesYes

Maximum Extension Length Using Cable Extension Units FZ-VSJ

ItemModelTransmission
speed

No. of CH used
for connection

Maximum cable
length using 1
Camera Cable

Max. number
of connectable
Extension Units
Using Cable Extension Units
FZ-VSJ
Max. cable
length
Connection
configuration
High-speed
Digital CMOS
Cameras
FH-SM/SC15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
FH-SMX/SCXStandard15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
High speed5 m
(Using FZ-VS⬜/VSL⬜)
215 m[Configuration 3]
Camera cable: 5 m × 3
Extension Unit: 2
FH-SM02/SC02
FH-SM04/SC04
FH-SM12/SC12
FH-SMX05/SCX05
FH-SMX12/SCX12
Standard115 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
215 m
(Using FZ-VS4/VSL4)
4

45 m[Configuration 2]
Camera cable: 15 m × 6
Extension Unit: 4
High speed15 m
(Using FZ-VS⬜/VSL⬜)
215 m[Configuration 3]
Camera cable: 5 m × 3
Extension Unit: 2
25 m
(Using FZ-VS⬜/VSL⬜)
4

15 m[Configuration 4]
Camera cable: 5 m × 6
Extension Unit: 4
Digital CMOS
Cameras
FH-SM21R/SC21RStandard115 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
215 m
(Using FZ-VS4/VSL4)
4

45 m[Configuration 2]
Camera cable: 15 m × 6
Extension Unit: 4
High speed115 m
(Using FZ-VS4/VSL4)
215 m[Configuration 3]
Camera cable: 5 m × 3
Extension Unit: 2
25 m
(Using FZ-VS⬜/VSL⬜)
4

15 m[Configuration 4]
Camera cable: 5 m × 6
Extension Unit: 4
FH-SM05R/SC05R15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
FZ-S5M3/SC5M35 m
(Using FZ-VS⬜/VSL⬜)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
Digital CCD
Cameras
FZ-S/SC
FZ-S2M/SC2M
15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
FZ-S5M25 m
(Using FZ-VS⬜/VSL⬜)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
Small Digital
CCD Cameras
Flat type/Pen type
FZ-SF/SFC
FZ-SP/SPC
15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
High-speed
Digital CCD
Cameras
FZ-SH/SHC15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
Intelligent
Compact
Digital CMOS
Camera
FZ-SQ[]15 m
(Using FZ-VS4/VSL4)
245 m[Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2

Connection Configuration

Connection configuration using the maximum length of Camera cables

Remarks
Configuration 1Omron Xpectia FH
Configuration 2Omron Xpectia FHOmron Xpectia FH
Configuration 3Omron Xpectia FH
Configuration 4Omron Xpectia FHOmron Xpectia FH

Touch Panel Monitor

ItemDescriptionsOrder code
Omron Xpectia FHTouch Panel Monitor 12.1 inches
For FH Sensor Controllers

FH-MT12

Touch Panel Monitor Cables

ItemDescriptionsOrder code
Omron Xpectia FHDVI-Analog Conversion Cable for Touch Panel Monitor

Cable length: 2 m, 5 m or 10 m

FH-VMDA ⬜M

Omron Xpectia FHRS-232C cable for Touch Panel Monitor

Cable length: 2 m, 5 m or 10 m

XW2Z-⬜⬜⬜PP-1

Omron Xpectia FHUSB Cable for Touch Panel Monitor

Cable length: 2 m or 5 m

FH-VUAB ⬜M

A video signal cable and an operation signal cable are required to connect the Touch Panel Monitor.

SignalCable2 m5 m10 m
Video signalDVI-Analog Conversion CableYesYesYes
Touch panel
operation signal
USB CableYesYesNo
RS-232C CableYesYesYes

Parallel I/O Cables/Encoder Cable

ItemDescriptionsOrder code
Omron Xpectia FHParallel I/O Cable

Cable length: 2 m, 5 m or 15 m

XW2Z-S013-⬜

Omron Xpectia FHParallel I/O Cable for Connector-terminal Conversion Unit

Cable length: 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m

Connector-Terminal Block Conversion Units can be connected
(Terminal Blocks Recommended Products: OMRON XW2R-□34G-T)

XW2Z-⬜⬜⬜EE

Omron Xpectia FHConnector-Terminal Block Conversion Units, General-purpose devicesXW2R-⬜34GD-T

Omron Xpectia FHEncoder Cable for line-driver

Cable length: 1.5 m

FH-VR 1.5M

Parallel Converter Cable

When you change to connect the F series, FZ5 series, or FZ5-L series to FH series Sensor Controller, you can convert by using the appropriate parallel converter cable of FH-VPX series under the usable condition.

ItemApplicable modelUsable conditionOrder code
Omron Xpectia FHFZ⬜ series
  • Do not use RESET signal.
  • Use with COMIN and COMUT are same power source.
FH-VPX-FZ
Omron Xpectia FHFZ⬜-L35x series
  • Do not use RESET signal.
FH-VPX-FZL
Omron Xpectia FHF160 seriesF160-C10
  • Do not use RESET signal.
  • Use with COMIN and COMOUT are same power source.
  • Do not use DI5 and DI6.
FH-VPX-F160
Omron Xpectia FHF210 seriesF210-C10
  • Do not use RESET signal.
  • Use with COMIN and COMOUT are same power source.
  • Do not use DI8 and DI9.
FH-VPX-F210
F210-C10-ETN
F500 seriesF500-C10
Note:Cannot be used for the F160-C10CP/-C10CF.

Recommended EtherCAT and EtherNet/IP Communications Cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

Use Straight or cross STP (shielded twisted-pair) cable of category 5 or higher for EtherNet/IP.

Cable with Connectors

AppearanceItemRecommended
manufacturer
Cable length
(m)
Order code
Omron Xpectia FHCable with Connectors on Both Ends (RJ45/RJ45)
Standard RJ45 plugs type

Wire Gauge and Number of Pairs: AWG26, 4-pair Cable
Cable Sheath material: LSZH

Cable color: Yellow

OMRON0.3XS6W-6LSZH8SS30CM-Y
0.5XS6W-6LSZH8SS50CM-Y
1XS6W-6LSZH8SS100CM-Y
2XS6W-6LSZH8SS200CM-Y
3XS6W-6LSZH8SS300CM-Y
5XS6W-6LSZH8SS500CM-Y
Omron Xpectia FHCable with Connectors on Both Ends (RJ45/RJ45)
Rugged RJ45 plugs type

Wire Gauge and Number of Pairs: AWG22, 2-pair Cable
Cable color: Light blue

OMRON0.3XS5W-T421-AMD-K
0.5XS5W-T421-BMD-K
1XS5W-T421-CMD-K
2XS5W-T421-DMD-K
5XS5W-T421-GMD-K
10XS5W-T421-JMD-K
Omron Xpectia FHCable with Connectors on Both Ends (M12 Straight/M12 Straight)
Shield Strengthening Connector cable

M12/Smartclick Connectors
Wire Gauge and Number of Pairs: AWG22, 2-pair Cable
Cable color: Black

OMRON0.5XS5W-T421-BM2-SS
1XS5W-T421-CM2-SS
2XS5W-T421-DM2-SS
3XS5W-T421-EM2-SS
5XS5W-T421-GM2-SS
10XS5W-T421-JM2-SS
Omron Xpectia FHCable with Connectors on Both Ends (M12 Straight/RJ45)
Shield Strengthening Connector cable

M12/Smartclick Connectors
Rugged RJ45 plugs type
Wire Gauge and Number of Pairs: AWG22, 2-pair Cable
Cable color: Black

OMRON0.5XS5W-T421-BMC-SS
1XS5W-T421-CMC-SS
2XS5W-T421-DMC-SS
3XS5W-T421-EMC-SS
5XS5W-T421-GMC-SS
10XS5W-T421-JMC-SS

Cables/Connectors

ItemRecommended manufacturerOrder code
Products for EtherCAT or EtherNet/IP
(1000BASE-T/100BASE-TX)Wire gauge and number of pairs: AWG24, 4-pair cable
CablesHitachi Cable, Ltd.NETSTAR-C5E SAB 0.5 x 4P

Kuramo Electric Co.KETH-SB

SWCC Showa Cable Systems Co.FAE-5004

RJ45 ConnectorsPanduit CorporationMPS588-C

Products for EtherCAT or EtherNet/IP
(100BASE-TX/10BASE-T)Wire gauge and number of pairs: AWG22, 2-pair cable
CablesKuramo Electric Co.KETH-PSB-OMR

JMACS Japan Co., Ltd.PNET/B

RJ45 Assembly Connector

Omron Xpectia FH

OMRONXS6G-T421-1

Automation Software Sysmac Studio

Please purchase a DVD and licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. The license does not include the DVD.

ProductSpecificationsOrder code
Number of
licenses
Media
Sysmac Studio
Standard Edition
Ver.1.⬜⬜
The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCat Slave, and the HMI.

Sysmac Studio runs on the following OS.
Windows 7 (32-bit/64-bit version) /
Windows 8 (32-bit/64-bit version) /
Windows 8.1 (32-bit/64-bit version) /
Windows 10 (32bit/64bit version)This software provides functions of the Vision Edition. Refer to OMRON website for details such as supported models and functions.


(Media only)
DVD

SYSMAC-SE200D
1 licenseSYSMAC-SE201L
3 licenseSYSMAC-SE203L
10 licenseSYSMAC-SE210L
30 licenseSYSMAC-SE230L
50 licenseSYSMAC-SE250L
Sysmac Studio
Vision Edition
Ver.1.⬜⬜

Sysmac Studio Vision Edition is a limited license that provides selected functions required for FH-series/FQ-M-series Vision Sensor settings.1 licenseSYSMAC-VE001L
Sysmac Studio
Robot Additional
Option

Sysmac Studio Robot Additional Option is a license to enable the Vision & Robot integrated simulation.1 licenseSYSMAC-RA401L
Note:

  1. Site licenses are available for users who will run Sysmac Studio on multiple computers. Ask your OMRON sales representative for details.
  2. Sysmac Studio version 1.07 or higher supports the FH Series. Sysmac Studio does not support the FH-L550/-L550-10.

Development Environment

Please purchase a CD-ROM and licenses the first time you purchase the Application Producer. CD-ROMs and licenses are available individually. The license does not include the CD-ROM.

ProductSpecificationsOrder code
Number of Model
Standards licenses
Media
Application ProducerSoftware components that provide a development environment to further customize the standard controller features of the FH Series.

System requirements:
CPU: Intel Pentium Processor (SSE2 or higher)
OS: Windows 7 Professional (32/64bit) or Enterprise (32/64bit)
or Ultimate (32/64bit),
Windows 8 Pro (32/64bit) or Enterprise (32/64bit),
Windows 8.1 Pro (32/64bit) or Enterprise (32/64bit)
.NET Framework: .NET Framework 3.5 SP1 or higher
Memory: At least 2 GB RAM
Available disk space: At least 2 GB
Browser: Microsoft® Internet Explorer 6.0 or later
Display: XGA (1024 × 768), True Color (32-bit) or higher
Optical drive: CD/DVD driveThe following software is required to customize the software:
Microsoft® Visual Studio® 2008 Professional or
Microsoft® Visual Studio® 2010 Professional or
Microsoft® Visual Studio® 2012 Professional


(Media only)
CD-ROMFH-AP1
1 licenseFH-AP1L

Accessories

ItemDescriptionsOrder code
Omron Xpectia FHLCD Monitor 8.4 inchesFZ-M08
Omron Xpectia FHLCD Monitor cable

When you connect a LCD Monitor FZ-M08 to FH sensor controller,
please use it in combination with a DVI-I -RGB conversion connector FH-VMRGB.

2 mFZ-VM 2M
5 mFZ-VM 5M
Omron Xpectia FHDVI-I -RGB conversion connectorFH-VMRGB
Omron Xpectia FHUSB Memory2 GBFZ-MEM2G
8 GBFZ-MEM8G
Omron Xpectia FHSD Card2 GBHMC-SD291
4 GBHMC-SD491
Omron Xpectia FHDisplay/USB SwitcherFZ-DU
Mouse recommended products
Driverless wired mouse
(A mouse that requires the mouse driver to be installed is not supported.)
Omron Xpectia FHEtherCAT junction slaves3 portPower supply voltage:
20.4 to 28.8 VDC
(24 VDC –15 to 20%)
Current consumption:
0.08 A
GX-JC03
Omron Xpectia FH6 portCurrent consumption:
0.17 A
GX-JC06
Omron Xpectia FHIndustrial Switching Hubs for EtherNet/IP and Ethernet3 portFailure detection: NoneCurrent consumption:
0.08 A
W4S1-03B
Omron Xpectia FH5 portFailure detection: NoneCurrent consumption:
0.12 A
W4S1-05B
5 portFailure detection: SupportedW4S1-05C
Calibration plateFZD-CAL
Omron Xpectia FHCommon itemsrelated to DIN rail
(for FH-L550/-L550-10)
DIN rail mounting bracket
(For Lite Controllers)
FH-XDM-L
Omron Xpectia FHDIN 35 mm railPHOENIX CONTACT
  • Length:
    75.5/95.5/115.5/200 cm
  • Height: 7.5 mm
  • Material: Iron
  • Surface: Conductive
NS 35/7,5
PERF
  • Length:
    75.5/95.5/115.5/200 cm
  • Height: 15 mm
  • Material: Iron
  • Surface: Conductive
NS 35/15
PERF
Omron Xpectia FHEnd platePHOENIX CONTACTNeed 2 pieces each sensor controllerCLIPFIX 35
External lightingFLV Series

FL Series

Omron Xpectia FHFor Intelligent Compact Digital CMOS CameraMounting BracketFQ-XL
Omron Xpectia FHMounting BracketsFQ-XL2
Omron Xpectia FHPolarizing Filter -AttachmentFQ-XF1
Mounting Bracket for FZ-S⬜, FH-S⬜05R, FZ-S⬜XFZ-S-XLC
Mounting Bracket for FZ-S⬜2MFZ-S2M-XLC
Mounting Bracket for FZ-SH⬜FZ-SH-XLC
Mounting Bracket for FH-S⬜, FZ-S⬜5M⬜, FH-S⬜X05, FH-S⬜X12, FH-S⬜21RFH-SM-XLC
Mounting Bracket for FH-S⬜12FH-SM12-XLC
M42 – F Mount Conversion AdapterFH-ADF/M42-10

Lenses

Refer to the Vision Accessory Catalog (Cat. No. Q198) for details.

ResolutionCamera ModelSize of image elementRecommended lens
Standard LensTelecentric LensVibrations and
Shocks Resistant Lens
300,000-pixelFZ-SF/SFC1/3” equivalentFZ-LES Series
FZ-SP/SPC
FZ-S/SCSV-V SeriesVS-TCH SeriesVS-MCA Series
VS-MC Series
Non-telecentric Macro
VS-MC Series
FZ-SH/SHC
FH-SM/SC
400,000-pixelFH-SMX/SCX1/2.9” equivalent
2 million-pixelFZ-S2M/SC2M1/1.8” equivalentSV-H Series
FH-SM02/SC022/3” equivalentVS-H1 SeriesVS-TEV SeriesVS-MCA Series
VS-MC Series
4 million-pixelFH-SM04/SC041” equivalentVS-MCH Series
5 million-pixelFH-SM05R/SC05R1/2.5” equivalentSV-H SeriesVS-TCH SeriesVS-MCA Series
VS-MC Series
Non-telecentric Macro
VS-MC Series
FZ-S5M3/SC5M3
FZ-S5M2
2/3” equivalent
FH-SMX05/SCX052/3” equivalent
12 million-pixelFH-SMX12/SCX121.1” equivalentVS-LLD SeriesVS-TEV Series
FH-SM12/SC121.76” equivalentVS-L/M42-10 SeriesVS-MCL/M42 Series
20.4 million-pixelFH-SM21R/SC21R1” equivalentVS-LLD SeriesVS-TEV SeriesVS-MCH Series

Specifications

FH Sensor Controllers

High-speed, Large-capacity Controller

Sensor Controller SeriesFH-5050 Series
TypeHigh-speed, Large-capacity Controller (4 cores)
Sensor Controller ModelFH-5050FH-5050-10FH-5050-20
Parallel IONPN/PNP (common)
Main FunctionsOperation ModeStandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeYes (Maximum 8 lines)

Parallel ProcessingYes
Number of Connectable Camera248
Supported CameraFH-S series cameraAll of the FH-S series cameras are connectable.All of the FH-S series cameras are connectable

FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to Catalog.
Possible Number of Logging Images to Sensor ControllerRefer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365).
Possible Number of Scenes128
Operating on UIUSB MouseYes (wired USB and driver is unnecessary type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish
External InterfaceSerial CommunicationRS-232C × 1
Ethernet CommunicationProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 2
EtherNet/IP CommunicationYes (Target/Ethernet port)
PROFINET Communication
  • Yes (Slave/Ethernet port)
  • Conformance class A
EtherCAT CommunicationYes (slave) Refer to Catalog about EtherCAT Communications Specifications.
Parallel I/O12 inputs/31 outputs:

  • Use 1 Line.
  • Operation mode: Except Multi-line random-trigger mode.
17 inputs/37 outputs:

  • Use 2 Lines.
  • Operation mode: Multi-line random-trigger mode.
14 inputs/29 outputs:

  • Use 3 to 4 Lines.
  • Operation mode: Multi-line random-trigger mode.
19 inputs/34 outputs:

  • Use 5 to 8 Lines.
  • Operation mode: Multi-line random-trigger mode.
Encoder InterfaceInput voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB3.0 host × 2 (BUS Power: Port5 V/0.5 A)
USB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SD Card I/FSDHC × 1
Indicator LampsMainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
Power-supply voltage20.4 VDC to 26.4 VDC
Current consumptionWhen connecting an intelligent compact digital camera

  • When connecting the following light or lighting controller without an external power supply
    FLV-TCC1, FLV-TCC4, FLV-TCC3HB FLV-TCC1EP, FL-TCC1
  • When connecting the following light or lighting controller
    FL-TCC1PS, FL-MD⬜MC
5.6 A max.7.7 A max.12.2 A max.
Other than above4.5 A max.5.5 A max.7.3 A max.
Built-in FANYes
Usage EnvironmentAmbient temperature rangeOperating: 0°C to +45°C
Storage: –20 to +65°C (with no icing or condensation)
Ambient humidity rangeOperating: 35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration toleranceOscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s²
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right
Shock resistanceImpact force: 150 m/s²
Test direction: up and down/front and behind/left and right
Noise immunityFast Transient Burst
  • DC power
    Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
  • I/O line
    Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance)

External FeaturesDimensions190 mm × 115 mm × 182.5 mm

Note Height: Including the feet at the base.

WeightApprox. 3.4 kgApprox. 3.6 kgApprox. 3.6 kg
Degree of protectionIEC60529 IP20
Case materialCover: zinc-plated steel plate

Side plate: aluminum (A6063)

AccessoriesInstruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1, Power source (FH-XCN): 1 (male),
Ferrite core for camera cable: 2 (FH-5050, FH-2050), 4 (FH-5050-10, FH-2050-10), 8 (FH-5050-20, FH-2050-20)
Sensor Controller SeriesFH-2050 Series
TypeHigh-speed, Large-capacity Controller (2 cores)
Sensor Controller ModelFH-2050FH-2050-10FH-2050-20
Parallel IONPN/PNP (common)
Main FunctionsOperation ModeStandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeYes (Maximum 8 lines)

Parallel ProcessingYes
Number of Connectable Camera248
Supported CameraFH-S series cameraAll of the FH-S series cameras are connectable.All of the FH-S series cameras are connectable

FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to Catalog.
Possible Number of Logging Images to Sensor ControllerRefer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365).
Possible Number of Scenes128
Operating on UIUSB MouseYes (wired USB and driver is unnecessary type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish
External InterfaceSerial CommunicationRS-232C × 1
Ethernet CommunicationProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 2
EtherNet/IP CommunicationYes (Target/Ethernet port)
PROFINET Communication
  • Yes (Slave/Ethernet port)
  • Conformance class A
EtherCAT CommunicationYes (slave) Refer to Catalog about EtherCAT Communications Specifications.
Parallel I/O12 inputs/31 outputs:

  • Use 1 Line.
  • Operation mode: Except Multi-line random-trigger mode.
17 inputs/37 outputs:

  • Use 2 Lines.
  • Operation mode: Multi-line random-trigger mode.
14 inputs/29 outputs:

  • Use 3 to 4 Lines.
  • Operation mode: Multi-line random-trigger mode.
19 inputs/34 outputs:

  • Use 5 to 8 Lines.
  • Operation mode: Multi-line random-trigger mode.
Encoder InterfaceInput voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB3.0 host × 2 (BUS Power: Port5 V/0.5 A)
USB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SD Card I/FSDHC × 1
Indicator LampsMainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
Power-supply voltage20.4 VDC to 26.4 VDC
Current consumptionWhen connecting an intelligent compact digital camera

  • When connecting the following light or lighting controller without an external power supply
    FLV-TCC1, FLV-TCC4, FLV-TCC3HB, FLV-TCC1EP, FL-TCC1
  • When connecting the following light or lighting controller
    FL-TCC1PS, FL-MD⬜MC
4.6 A max.6.6 A max.11.2 A max.
Other than above3.5 A max.4.3 A max.6.3 A max.
Built-in FANYes
Usage EnvironmentAmbient temperature rangeOperating: 0°C to +45°C
Storage: –20 to +65°C (with no icing or condensation)
Ambient humidity rangeOperating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration toleranceOscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s²
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right
Shock resistanceImpact force: 150 m/s²
Test direction: up and down/front and behind/left and right
Noise immunityFast Transient Burst
  • DC power
    Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
  • I/O line Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance)

External FeaturesDimensions190 mm × 115 mm × 182.5 mm
Note Height: Including the feet at the base.
WeightApprox. 3.4 kgApprox. 3.6 kgApprox. 3.6 kg
Degree of protectionIEC60529 IP20
Case materialCover: zinc-plated steel plate
Side plate: aluminum (A6063)
AccessoriesInstruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1, Power source (FH-XCN): 1 (male),
Ferrite core for camera cable: 2 (FH-5050, FH-2050), 4 (FH-5050-10, FH-2050-10), 8 (FH-5050-20, FH-2050-20)

Standard Controller

Sensor Controller SeriesFH-3050 Series
TypeStandard Controller (4 cores)
Sensor Controller ModelFH-3050FH-3050-10FH-3050-20
Parallel IONPN/PNP (common)
Main FunctionsOperation ModeStandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeYes (Maximum 8 lines)

Parallel ProcessingYes
Number of Connectable Camera248
Supported CameraFH-S series cameraAll of the FH-S series cameras except FH-SM21R/SC21RAll of the FH-S series cameras except FH-SM21R/SC21R

FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to Catalog.
Possible Number of Logging Images to Sensor ControllerRefer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365).
Possible Number of Scenes128
Operating on UIUSB MouseYes (wired USB and driver is unnecessary type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish
External InterfaceSerial CommunicationRS-232C × 1
Ethernet CommunicationProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 2
EtherNet/IP CommunicationYes (Target/Ethernet port)
PROFINET Communication
  • Yes (Slave/Ethernet port)
  • Conformance class A
EtherCAT CommunicationYes (slave) Refer to about EtherCAT Communications Specifications.
Parallel I/O12 inputs/31 outputs:

  • Use 1 Line.
  • Operation mode: Except Multi-line random-trigger mode.
17 inputs/37 outputs:

  • Use 2 Lines.
  • Operation mode: Multi-line random-trigger mode.
14 inputs/29 outputs:

  • Use 3 to 4 Lines.
  • Operation mode: Multi-line random-trigger mode.
19 inputs/34 outputs:

  • Use 5 to 8 Lines.
  • Operation mode: Multi-line random-trigger mode.
Encoder InterfaceInput voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SD Card I/FSDHC × 1
Indicator LampsMainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN: Green
LINK/ACT: Yellow
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
Power-supply voltage20.4 VDC to 26.4 VDC
Current consumptionWhen connecting an intelligent compact digital camera

  • When connecting the following light or lighting controller without an external power supply:
    FLV-TCC1, FLV-TCC4, FLV-TCC3HB, FLV-TCC1EP, FL-TCC1
  • When connecting the following light or lighting controller:
    FL-TCC1PS, FL-MD⬜MC
5.0 A max.7.0 A max.11.5 A max.
Other than above4.1 A max.4.8 A max.6.8 A max.
Built-in FANYes
Usage EnvironmentAmbient temperature rangeOperating: 0°C to +50°C
Storage: –20 to +65°C (with no icing or condensation)
Ambient humidity rangeOperating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration toleranceOscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s²
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right
Shock resistanceImpact force: 150 m/s²
Test direction: up and down/front and behind/left and right
Noise immunityFast Transient Burst
  • DC power
    Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
  • I/O line
    Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance)

External FeaturesDimensions190 mm × 115 mm × 182.5 mm
Note Height: Including the feet at the base.
WeightApprox. 3.2 kgApprox. 3.4 kgApprox. 3.4 kg
Degree of protectionIEC60529 IP20
Case materialCover: zinc-plated steel plate
Side plate: aluminum (A6063)
AccessoriesInstruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1, Power source (FH-XCN): 1 (male),
Ferrite core for camera cable: 2 (FH-3050, FH-1050), 4 (FH-3050-10, FH-1050-10), 8 (FH-3050-20, FH-1050-20)
Sensor Controller SeriesFH-1050 Series
TypeStandard Controller (2 cores)
Sensor Controller ModelFH-1050FH-1050-10FH-1050-20
Parallel IONPN/PNP (common)
Main FunctionsOperation ModeStandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeYes (Maximum 8 lines)

Parallel ProcessingYes
Number of Connectable Camera248
Supported CameraFH-S series cameraAll of the FH-S series cameras except FH-SM21R/SC21RAll of the FH-S series cameras except FH-SM21R/SC21R

FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to Catalog.
Possible Number of Logging Images to Sensor ControllerRefer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365).
Possible Number of Scenes128
Operating on UIUSB MouseYes (wired USB and driver is unnecessary type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish
External InterfaceSerial CommunicationRS-232C × 1
Ethernet CommunicationProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 2
EtherNet/IP CommunicationYes (Target/Ethernet port)
PROFINET Communication
  • Yes (Slave/Ethernet port)
  • Conformance class A
EtherCAT CommunicationYes (slave) Refer to about EtherCAT Communications Specifications.
Parallel I/O12 inputs/31 outputs:

  • Use 1 Line.
  • Operation mode: Except Multi-line random-trigger mode.
17 inputs/37 outputs:

  • Use 2 Lines.
  • Operation mode: Multi-line random-trigger mode.
14 inputs/29 outputs:

  • Use 3 to 4 Lines.
  • Operation mode: Multi-line random-trigger mode.
19 inputs/34 outputs:

  • Use 5 to 8 Lines.
  • Operation mode: Multi-line random-trigger mode.
Encoder InterfaceInput voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SD Card I/FSDHC × 1
Indicator LampsMainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN: Green
LINK/ACT: Yellow
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
Power-supply voltage20.4 VDC to 26.4 VDC
Current consumptionWhen connecting an intelligent compact digital camera

  • When connecting the following light or lighting controller without an external power supply
    FLV-TCC1, FLV-TCC4, FLV-TCC3HB, FLV-TCC1EP, FL-TCC
  • When connecting the following light or lighting controller
    FL-TCC1PS, FL-MD⬜MC
4.7 A max.6.5 A max.10.9 A max.
Other than above3.6 A max.4.3 A max.6.2 A max.
Built-in FANYes
Usage EnvironmentAmbient temperature rangeOperating: 0°C to +50°C
Storage: –20 to +65°C (with no icing or condensation)
Ambient humidity rangeOperating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration toleranceOscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s²
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front and behind/left and right
Shock resistanceImpact force: 150 m/s²
Test direction: up and down/front and behind/left and right
Noise immunityFast Transient Burst
  • DC power
    Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
  • I/O line
    Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance)

External FeaturesDimensions190 mm × 115 mm × 182.5 mm
Note Height: Including the feet at the base.
WeightApprox. 3.2 kgApprox. 3.4 kgApprox. 3.4 kg
Degree of protectionIEC60529 IP20
Case materialCover: zinc-plated steel plate
Side plate: aluminum (A6063)
AccessoriesInstruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1, Power source (FH-XCN): 1 (male),
Ferrite core for camera cable: 2 (FH-3050, FH-1050), 4 (FH-3050-10, FH-1050-10), 8 (FH-3050-20, FH-1050-20)

Lite Controllers

Sensor Controller SeriesFH-L550 Series
TypeLite Controller
Sensor Controller ModelFH-L550FH-L550-10
Parallel IONPN/PNP (common)
Main FunctionsOperation ModeStandardYes
Double Speed Multi-inputYes
Non-stop adjustment modeYes
Multi-line random-trigger modeNo
Parallel ProcessingYes
Number of Connectable Camera24
Supported CameraFH-S series cameraAll of the FH-S series cameras except FH-SM21R/SC21R
FZ-S series cameraAll of the FZ-S series cameras are connectable.
Camera I/FOMRON I/F
Possible Number of Captured ImagesRefer to Catalog.
Possible Number of Logging Images to Sensor ControllerRefer to the Vision System FH/FZ5 Series User’s Manual (Cat. No. Z365).
Possible Number of Scenes128
UI OperationsUSB MouseYes (wired USB driver-less type)
Touch PanelYes (RS-232C/USB connection: FH-MT12)
SetupCreate the processing flow using Flow editing.
LanguageJapanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish
External InterfaceSerial CommunicationRS-232C × 1
Ethernet CommunicationProtocolNon-procedure (TCP/UDP)
I/F1000BASE-T × 1
EtherNet/IP CommunicationYes (Target/Ethernet port)
PROFINET Communication
  • Yes (Slave/Ethernet port)
  • Conformance class A
EtherCAT CommunicationNo
Parallel I/O
  • High-speed input: 1
  • Normal speed: 9
  • High-speed output: 4
  • Normal speed: 23
Encoder InterfaceNone
Monitor InterfaceDVI-I output (Analog RGB & DVI-D single link) × 1
USB I/FUSB2.0 host × 1: BUS Power: Port 5 V/0.5 A
USB3.0 × 1: BUS Power: Port 5 V/0.5 A
SD Card I/FSDHC × 1
Indicator LampsMainPOWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
EthernetNET RUN: Green
LINK/ACT: Yellow
SD CardSD POWER: Green
SD BUSY: Yellow
EtherCATNone
Power-supply voltage20.4 VDC to 26.4 VDC
Current consumptionWhen connecting an intelligent compact digital camera

  • When connecting the following light or lighting controller without an external power supply
    FLV-TCC1, FLV-TCC4, FLV-TCC3HB, FLV-TCC1EP, FL-TCC1
  • When connecting the following light or lighting controller
    FL-TCC1PS, FL-MD⬜MC
2.7 A max.4.4 A max.
Other than above1.5 A max.2.0 A max.
Built-in FANNo
Usage EnvironmentAmbient temperature rangeOperating: 0°C to 55°C
Storage: –25 to +70°C
Ambient humidity rangeOperating and Storage: 10 to 90%RH (with no condensation)
Ambient atmosphereNo corrosive gases
Vibration tolerance5 to 8.4 Hz with 3.5 mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m/s²
100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Shock resistanceImpact force: 150 m/s²
Test direction: up and down/front and behind/left and right
Noise immunityFast Transient Burst
  • DC power Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
  • I/O line Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse width: 50 ns, Burst continuation time: 15 ms/0.75 ms, Period: 300 ms, Application time: 1 min
GroundingType D grounding (100 Ω or less grounding resistance)

External FeaturesDimensions200 mm × 80 mm × 130 mm
WeightApprox. 1.5 kgApprox. 1.5 kg
Degree of protectionIEC60529 IP20
Case materialsPC
AccessoriesInstruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH-L series:1,
General Compliance Information and Instructions for EU:1,
Member registration sheet: 1,
Power source (FH-XCN-L):1 (male)

Maximum Number of Loading Images during Multi-input

CameraModelMax. Number of Loading Images during Multi-input

Intelligent Compact Digital

CMOS Cameras

FZ-SQ010F/-SQ050F/-SQ100F/-SQ100N256
300,000 pixels

CCD/CMOS Cameras

FZ-S/-SC/-SF/SFC/-SH/-SHC/-SP/-SPC

FH-SM/-SC

256
400,000 pixels

CMOS Cameras

FH-SMX/-SCX256
2 million pixels

CCD Cameras

FZ-S2M/-SC2M64
2 million pixels

CMOS Cameras

FH-SM02/-SC0251
4 million pixels

CMOS Cameras

FH-SM04/-SC0432
5 million pixels

CCD/CMOS Cameras

FZ-S5M3/-SC5M3/-S5M2

FH-SMX05/-SCX05/-SM05R/-SC05R

25
12 million pixels

CMOS Cameras

FH-SM12/-SC12/-SMX12/-SCX1210
20.4 million pixels

CMOS Cameras

FH-SM21R/-SC21R6

Cameras

High-speed Digital CMOS cameras

ModelFH-SMFH-SCFH-SM02FH-SC02FH-SM04FH-SC04FH-SM12FH-SC12
Image elementsCMOS image elements
(1/3-inch equivalent)
CMOS image elements
(2/3-inch equivalent)
CMOS image elements
(1-inch equivalent)
CMOS image elements
(1.76-inch equivalent)
Color/MonochromeMonochromeColorMonochromeColorMonochromeColorMonochromeColor
Effective pixels640 (H) × 480 (V)2040 (H) × 1088 (V)2040 (H) × 2048 (V)4084 (H) × 3072 (V)
Imaging area H × V (opposing corner)4.8 × 3.6 (6.0 mm)11.26 × 5.98 (12.76 mm)11.26 × 11.26 (15.93 mm)22.5 × 16.9 (28.14 mm)
Pixel size7.4 (μm) × 7.4 (μm)5.5 (μm) × 5.5 (μm)5.5 (μm) × 5.5 (μm)5.5 (μm) × 5.5 (μm)
Shutter functionElectronic shutter;
Shutter speeds can be set from 20 ms to 100 ms.
Electronic shutter;
Shutter speeds can be set from 25 μs to 100 ms.
Electronic shutter;
Shutter speeds can be set from 60 μs to 100 ms.
Partial function1 to 480 lines2 to 480 lines1 to 1088 lines2 to 1088 lines1 to 2048 lines2 to 2048 lines4 to 3072 lines (4-line increments)
Frame rate (Image Acquisition Time

)

308 fps (3.3 ms)219 fps (4.6 ms)

118 fps (8.5 ms)

38.9 fps (25.7 ms)

Lens mountingC mountM42 mount
Field of vision, installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to 40 °C,
Storage: –25 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox. 105 gApprox. 110 gApprox. 320 g
AccessoriesInstruction manual
ModelFH-SMXFH-SCXFH-SMX05FH-SCX05FH-SMX12FH-SCX12
Image elementsCMOS image elements (1/2.9-inch equivalent)CMOS image elements (2/3-inch equivalent)CMOS image elements (1.1-inch equivalent)
Color/MonochromeMonochromeColorMonochromeColorMonochromeColor
Effective pixels720 (H) × 540 (V)2448 (H) × 2048 (V)4092 (H) × 3000 (V)
Imaging area H x V (opposing corner)4.97 × 3.73 (6.21 mm)8.45 × 7.07 (11.01 mm)14.12 × 10.35 (17.5 mm)
Pixel size6.9 (μm) × 6.9 (μm)3.45 (μm) × 3.45 (μm)
Shutter functionElectronic shutter;
Shutter speeds can be set from 1 ms to 100 ms.
Electronic shutter;
Shutter speeds can be set from 15 μs to 100 ms.
Partial function4 to 540 lines (4-line increments)4 to 2048 lines (4-line increments)4 to 3000 lines (4-line increments)
Frame rate (Image Acquisition Time

)

523.6 fps (1.9 ms)97.2 fps (10.3 ms)

40.1 fps (24.9 ms)

Lens mountingC mount
Field of vision, installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to 50 °C,
Storage: –25 to 65 °C(with no icing or condensation)
Operating: 0 to 40 °C,
Storage: -25 to 65 °C(with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox.48 gApprox.85 g
AccessoriesInstruction manual, General Compliance Information and Instructions for EU

Digital CMOS Cameras

ModelFH-SM05RFH-SC05RFH-SM21RFH-SC21RFZ-S5M3FZ-SC5M3
Image ElementsCMOS image elements (1/2.5-inch equivalent)CMOS image elements (1-inchequivalent)CMOS image elements (2/3-inch equivalent)
Color/MonochromeMonochromeColorMonochromeColorMonochromeColor
Effective Pixels2592 (H) × 1944 (V)5544 (H) × 3692 (V)2448 (H) × 2048 (V)
Imaging area H × V (opposing corner)5.70 × 4.28 (7.13 mm)13.31 × 8.86 (16.00 mm)8.45 × 7.07 (11.01 mm)
Pixel Size2.2 (μm) × 2.2 (μm)2.4 (μm) × 2.4 (μm)3.45 (μm) × 3.45 (μm)
Scan TypeProgressive
Shutter MethodRolling shutter (Global reset mode supported)Global shutter
Shutter FunctionElectronic shutter;
Shutter speeds can be set from 500 to 10000 ms in multiples of 50 μs
Electronic shutter;
Shutter speeds can be set from 50 μs to 100 ms.
Electronic shutter;
Shutter speeds can be set from 20 μs to 100 ms.
Partial function4 to 1944 lines (2-line increments)1848 to 3692 lines4 to 2048 lines
Frame rate (Image Acquisition Time

)

14 fps (71.7 ms)23.5 fps (42.6 ms)25.6 fps (38.2 ms)
Lens MountingC mount
Field of vision, Installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to +40°C
Storage: –30 to 65°C
(with no icing or condensation)
Operating: 0 to +40°C
Storage: –20 to 65°C
(with no icing or condensation)
Operating: 0 to +40°C
Storage: –30 to 65°C
(with no icing or condensation)
Ambient humidity rangeOperating: 35 to 85%RH, Storage: 35 to 85%RH (with no condensation)
WeightApprox. 52 gApprox. 85 g
AccessoriesInstruction SheetInstruction Sheet, General Compliance Information and Instructions for EU

Digital CCD Cameras

ModelFZ-SFZ-SCFZ-S2MFZ-SC2MFZ-S5M2
Image elementsInterline transfer reading all pixels,
CCD image elements
(1/3-inch equivalent)
Interline transfer reading all pixels,
CCD image elements
(1/1.8-inch equivalent)
Interline transfer reading all pixels,
CCD image elements
(2/3-inch equivalent)
Color/MonochromeMonochromeColorMonochromeColorMonochrome
Effective pixels640 (H) × 480 (V)1600 (H) × 1200 (V)2448 (H) × 2044 (V)
Imaging area H x V
(opposing corner)
4.8 × 3.6 (6.0 mm)7.1 × 5.4 (8.9 mm)8.4 × 7.1 (11 mm)
Pixel size7.4 (μm) × 7.4 (μm)4.4 (μm) × 4.4 (μm)3.45 (μm) × 3.45 (μm)
Shutter functionElectronic shutter; select shutter speeds from 20 μs to 100 ms
Partial function12 to 480 lines12 to 1200 lines12 to 2044 lines
Frame rate (Image Acquisition Time

)

80 fps (12.5 ms)30 fps (33.3 ms)16 fps (62.5 ms)
Lens mountingC mount
Field of vision, installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to 50 °C
Storage: –25 to 65 °C
(with no icing or condensation)
Operating: 0 to 40 °C
Storage: –25 to 65 °C
(with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox. 55 gApprox. 76 gApprox. 140 g
AccessoriesInstruction manual

Small CCD Digital Cameras

ModelFZ-SFFZ-SFCFZ-SPFZ-SPC
Image elementsInterline transfer reading all pixels,
CCD image elements
(1/3-inch equivalent)
Color/MonochromeMonochromeColorMonochromeColor
Effective pixels640 (H) × 480 (V)
Imaging area H x V
(opposing corner)
4.8 × 3.6 (6.0 mm)
Pixel size7.4 (μm) × 7.4 (μm)
Shutter functionElectronic shutter; select shutter speeds from 20 μm to 100 ms
Partial function12 to 480 lines
Frame rate (Image Acquisition Time

)

80 fps (12.5 ms)
Lens mountingSpecial mount (M10.5 P0.5)
Field of vision, installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to 50 °C (camera amp), 0 to 45 °C (camera head)
Storage: –25 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox. 150 g
AccessoriesInstruction manual, installation bracket,
Four mounting brackets (M2)
Instruction manual

High-speed Digital CCD Cameras

ModelFZ-SHFZ-SHC
Image elementsInterline transfer reading all pixels,
CCD image elements
(1/3-inch equivalent)
Color/MonochromeMonochromeColor
Effective pixels640 (H) × 480 (V)
Imaging area H x V
(opposing corner)
4.8 × 3.6 (6.0 mm)
Pixel size7.4 (μm) × 7.4 (μm)
Shutter functionElectronic shutter; select shutter speeds from 1/10 to 1/50,000 s
Partial function12 to 480 lines
Frame rate (Image Acquisition Time

)

204 fps (4.9 ms)
Field of vision, installation distanceSelecting a lens according to the field of vision and installation distance
Ambient temperature rangeOperating: 0 to 40 °C
Storage: –25 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox. 105 g
AccessoriesInstruction manual

Intelligent Compact Digital CMOS Cameras

ModelFZ-SQ010FFZ-SQ050FFZ-SQ100FFZ-SQ100N
Image elementsCMOS color image elements
(1/3-inch equivalent)
Color/MonochromeColor
Effective pixels752 (H) × 480 (V)
Imaging area H x V
(opposing corner)
4.51 × 2.88 (5.35 mm)
Pixel size6.0 (μm) × 6.0 (μm)
Shutter function1/250 to 1/32,258
Partial function8 to 480 lines
Frame rate (Image Acquisition Time

)

60 fps (16.7 ms)
Field of vision7.5 × 4.7 to 13 × 8.2 mm13 × 8.2 to 53 × 33 mm53 × 33 to 240 × 153 mm29 × 18 to 300 × 191 mm
Installation distance38 to 60 mm56 to 215 mm220 to 970 mm32 to 380 mm
LED class

Risk Group2
Ambient temperature rangeOperating: 0 to 50 °C
Storage: –25 to 65 °C
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
WeightApprox. 150 gApprox. 140 g
AccessoriesMounting bracket (FQ-XL), polarizing filter attachment (FQ-XF1), instruction manual and warning label

Omron Xpectia FH

Cable, Monitor

Camera Cables

ModelFZ-VS3 (2 m)FZ-VSB3 (2 m)FZ-VSL3 (2 m)FZ-VSLB3 (2 m)
TypeStandardBend resistantRight-angleBend resistant Right-angle
Shock resistiveness (durability)10 to 150 Hz single amplitude 0.15 mm 3 directions, 8 strokes, 4 times
Ambient temperature rangeOperation and storage: 0 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperation and storage: 40 to 70%RH (with no condensation)
Ambient atmosphereNo corrosive gases
MaterialCable sheath, connector: PVC
Minimum bending radius69 mm69 mm69 mm69 mm
WeightApprox. 170 gApprox. 180 gApprox. 170 gApprox. 180 g

Cable Extension Unit

ModelFZ-VSJ
Power supply voltage

11.5 to 13.5 VDC
Current consumption

1.5 A max.
Ambient temperature rangeOperating: 0 to 50 °C; Storage: –25 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35 to 85% (with no condensation)
Maximum Units connectable2 Units per Camera
WeightApprox. 240 g
AccessoriesInstruction Sheet and 4 mounting screws

Long-distance Camera Cables

ModelFZ-VS4 (15 m)FZ-VSL4 (15 m)
TypeStandardRight-angle
Shock resistiveness (durability)10 to 150 Hz single amplitude 0.15 mm 3 directions, 8 strokes, 4 times
Ambient temperature rangeOperation and storage: 0 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperation and storage: 40 to 70%RH (with no condensation)
Ambient atmosphereNo corrosive gases
MaterialCable sheath, connector: PVC
Minimum bending radius78 mm
WeightApprox. 1400 g

Encoder Cable

ModelFH-VR
Vibration resistiveness10 to 150 Hz single amplitude 0.1 mm 3 directions, 8 strokes, 10 times
Ambient temperature rangeOperation: 0 to 50 °C; Storage: –10 to 60 °C (with no icing or condensation)
Ambient humidity rangeOperation and storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
MaterialCable Jacket: Heat, oil and flame resistant PVC
Connector: polycarbonate resin
Minimum bending radius65 mm
WeightApprox. 104 g

Touch Panel Monitor

ModelFH-MT12
Major FunctionDisplay area12.1 inch
Resolution1024 (V) × 768 (H)
Number of color16,700,000 colors (8 bit/color)
Brightness500 cd/m 2 (Typ)
Contrast Ratio600:1 (Typ)
Viewing angleLeft and right: each 80°, upward: 80°, downward: 60°
Backlight UnitLED, edge-light
Backlight lifetimeAbout 100,000 hour
Touch panel4 wire resistive touch screen
External interfaceVideo inputanalog RGB
Touch panel signalUSB
RS-232C
RatingsPower supply voltage24 VDC (21.6 to 26.4 VDC)
Current consumption0.5A
Insulation resistanceBetween DC power supply and Touch Panel Monitor FG: 20 MΩ or higher (rated voltage 250 V)
Operating environmentAmbient temperature rangeOperating: 0 to 50°C, Storage: –20 to +65°C
(with no icing or condensation)
Ambient humidity rangeOperating and Storage: 20 to 85 %RH (with no icing or condensation)
Ambient environmentNo corrosive gas
Vibration resistance10 to 150 Hz, one-side amplitude 0.1 mm (Max. acceleration 15 m/s²)
10 times for 8 minutes for each three direction
Degree of protectionPanel mounting: IP65 on the front
OperationTouch pen
StructureMountingPanel mounting, VESA mounting
WeightApprox. 2.6 kg
MaterialFront panel: PC/PBT, Front Sheet: PET, Rear case: SUS
Note:FH Series Sensor Controllers version 5.32 or higher is required.

Touch Panel Monitor Cables

ModelFH-VMDA (2 m)FH-VUAB (2 m)XW2Z-200PP-1 (2 m)
Cable typeDVI-Analog Conversion CableUSB CableRS-232C Cable
Vibration resistance10 to 150 Hz, one-side amplitude 0.1 mm, 10 times for 8 minutes for each three direction
Ambient TemperatureOperating Condition: 0 to 50°C, Storage Condition: –10 to 60°C (with no icing or condensation)
Ambient HumidityOperating Condition: 35 to 85%RH, Storage Condition: 35 to 85%RH (with no icing or condensation)
Ambient environmentNo corrosive gases
MaterialCable outer sheath, Connector: PVCCable outer sheath: PVC,Connector: ABS/Ni Plating
Minimum bend radius36 mm25 mm59 mm
WeightApprox. 220 gApprox. 75 gApprox. 162 g

LCD Monitor

ModelFZ-M08
Size8.4 inches
TypeLiquid crystal color TFT
Resolution1,024 × 768 dots
Input signalAnalog RGB video input, 1 channel
Power supply voltage21.6 to 26.4 VDC
Current consumptionApprox. 0.7 A max.
Ambient temperature rangeOperating: 0 to 50 °C; Storage: –25 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35 to 85% (with no condensation)
WeightApprox. 1.2 kg
AccessoriesInstruction Sheet and 4 mounting brackets

LCD Monitor Cable

ModelFZ-VM
Vibration resistiveness10 to 150 Hz single amplitude 0.15 mm 3 directions, 8 strokes, 4 times
Ambient temperature rangeOperation: 0 to 50 °C; Storage: –20 to 65 °C (with no icing or condensation)
Ambient humidity rangeOperation and storage: 35 to 85%RH (with no condensation)
Ambient atmosphereNo corrosive gases
MaterialCable sheath: heat-resistant PVC Connector: PVC
Minimum bending radius75 mm
WeightApprox. 170 g
Note:When you connect a LCD Monitor FZ-M08 to FH sensor controller, please use it in combination with a DVI-I -RGB Conversion Connector FH-VMRGB.

EtherCAT Communications Specifications

ItemSpecifications
Communications standardIEC61158 Type 12
Physical layer100 BASE-TX (IEEE802.3)
ModulationBase band
Baud rate100 Mbps
TopologyDepends on the specifications of the EtherCAT master.
Transmission MediaTwisted-pair cable of category 5 or higher (double-shielded straight cable with aluminum tape and braiding)
Transmission DistanceDistance between nodes: 100 m or less
Node address setting00 to 9
External connection terminalsRJ45 × 2 (shielded) IN: EtherCAT input data, OUT: EtherCAT output data
Send/receive PDO data sizesInput56 to 280 bytes/line (including input data, status, and unused areas) Up to 8 lines can be set.

Output28 bytes/line (including output data and unused areas) Up to 8 lines can be set.

Mailbox data sizeInput512 bytes
Output512 bytes
MailboxEmergency messages, SDO requests, and SDO information
Refreshing methodsI/O-synchronized refreshing (DC)

Version Information

FH Series and Programming Devices

Use the latest version of Sysmac Studio Standard Edition/Vision Edition.

FH SeriesVersion of FH SeriesCorresponding version of Sysmac Studio Standard Edition/Vision Edition
FH-5050 (-⬜)
FH-3050 (-⬜)
FH-2050 (-⬜)
FH-1050 (-⬜)
Version 6.11Will be supported soon.
(Add the ESI file

until it is supported.)

Version 5.72Supported by version 1.18 or higher.
Version 5.71Supported by version 1.18 or higher.
Version 5.60Supported by version 1.15 or higher.
Version 5.50Supported by version 1.14.89 or higher.
Version 5.30Supported by version 1.10.80 or higher.
Version 5.20Supported by version 1.10 or higher.
Version 5.10Supported by version 1.07.43 or higher.
Version 5.00Supported by version 1.07 or higher. Not supported by version 1.06 or lower.

Dimensions

Sensor Controllers

High-speed, Large-capacity Controllers/Standard Controllers

FH-5050/-5050-10/-5050-20
FH-2050/-2050-10/-2050-20
FH-3050/-3050-10/-3050-20
FH-1050/-1050-10/-1050-20Omron Xpectia FH

Lite Controllers

FH-L550/-L550-10

Omron Xpectia FH

Cameras

High-speed Digital CMOS Camera/Digital CMOS Camera

300,000-pixel camera
FH-SC
FH-SMOmron Xpectia FH400,000-pixel camera
FH-SCX
FH-SMXOmron Xpectia FH2 million-pixel camera
FH-SC02
FH-SM024 million-pixel camera
FH-SC04
FH-SM04Omron Xpectia FH5 million-pixel camera
FH-SM05R
FH-SC05ROmron Xpectia FHFZ-S5M3
FZ-SC5M3Omron Xpectia FH5 million-pixel camera
FH-SCX05
FH-SMX0512 million-pixel camera
FH-SCX12
FH-SMX1220.4 million-pixel camera
FH-SC21R
FH-SM21ROmron Xpectia FH12 million-pixel camera
FH-SC12
FH-SM12Omron Xpectia FH

Digital CCD/CMOS Cameras

300,000-pixel camera
FZ-S
FZ-SCOmron Xpectia FH2 million-pixel camera
FZ-S2M
FZ-SC2MOmron Xpectia FH5 million-pixel camera
FZ-S5M2Omron Xpectia FH

High-speed CCD Camera

FZ-SH
FZ-SHCOmron Xpectia FH

Small digital CCD cameras

Flat camera
FZ-SF
FZ-SFCOmron Xpectia FHPen-shaped camera
FZ-SP
FZ-SPCOmron Xpectia FHCamera amplifier
Can be used for both flat cameras and pen-shaped camerasOmron Xpectia FH

Intelligent Compact Digital CMOS Cameras

Narrow view/Standard
FZ-SQ010F
FZ-SQ050FOmron Xpectia FHWide View
FZ-SQ100F (long-distance)
FZ-SQ100N (short-distance)Omron Xpectia FH

Cables

Camera Cable

Camera Cable
FZ-VS3Omron Xpectia FHBend resistant Camera Cable
FZ-VSB3Omron Xpectia FHRight-angle Camera Cable
FZ-VSL3Omron Xpectia FHBend resistant Right-angle Camera CableFZ-VSLB3Omron Xpectia FHLong-distance Camera Cable
FZ-VS4Omron Xpectia FHLong-distance Right-angle Camera Cable
FZ-VSL4

Omron Xpectia FH

Note:Cable is available in 2 m/3 m/5 m/10 m.

Each camera cables has polarity.
Please ensure that the name plate side of the cable is connected to the controller.

Cable is available in 15 m.

Camera Cable Extension Unit

FZ-VSJ

Omron Xpectia FH

Extension Tubes for Small Camera

FZ-LESR

Omron Xpectia FH

Lens for Small Camera

FZ-LES Series

Omron Xpectia FH

Encoder Cable

FH-VR

Omron Xpectia FH

Parallel I/O Cable

XW2Z-S013-⬜

Omron Xpectia FH

Touch Panel Monitor

FH-MT12

Omron Xpectia FH

DVI-Analog Conversion Cable for Touch Panel Monitor

FH-VMDA

Omron Xpectia FH

RS-232C Cable for Touch Panel Monitor

XW2Z-⬜⬜⬜PP-1

Omron Xpectia FH

USB Cable for Touch Panel Monitor

FH-VUAB

Omron Xpectia FH

Note:Cable is available in 2 m/5 m/10 m.

Cable is available in 2 m/5 m.

LCD Monitor

FZ-M08

Omron Xpectia FH

LCD Monitor Cable

FZ-VM

Omron Xpectia FH

DVI-I -RGB Conversion Connector

FH-VMRGB

Omron Xpectia FH

Aksesuarlar

FLV aydınlatma ve 3Z4S lensler


Omron Xpectia FHFLV ve 3Z4S serileri, Omron Görüntü sistemleri için çok çeşitli aydınlatma, lens ve strob kontrol cihazları sunar. Akıllı denetim çözümleri, Xpectia FZ ve FH ile aydınlatmalarının doğrudan kontrolü sayesinde oluşturulabilir. Artık ışıklar için herhangi bir güç kaynağı gerekmemektedir, bu da uygulamanızda masraflardan ve alandan tasarruf etmenizi sağlar.

Dosya indirme

Broşürler


Kataloglar


Bağlantı Kılavuzu


Cihaz tanımı dosyaları (ZIP)


Veri Sayfası


Kılavuzlar


Yazılım (ZIP)