Omron CX-One

Single licence

Licence Only

CXONE-AL01-EV_

Three user licence

Licence Only

CXONE-AL03-EV_

Ten user licence

Licence Only

CXONE-AL010-EV_

Thirty user licence

Licence Only

CXONE-AL030-EV_

Fifty user licence

Licence Only

CXONE-AL050-EV_

Site licence

Licence Only

CXONE-AL0XX-EV_

Software on CDs

CD

CXONE-CD-EV_

Software on a DVD

DVD

CXONE-DVD-EV_

Single user licence

Licence Only

CXONE-LT01-EV_

Software on CD

CD

CXONE-LTCD-EV_

Programming

CX-Programmer

CX-Programmer provides one common PLC software platform for all types of Omron PLC controllers – from micro PLC’s up to Duplex processor systems. It allows easy conversion and re-use of PLC code between different PLC types, and the full re-use of control programs created by older generation PLC programming software.

CX-Simulator

A debugging environment equivalent to the actual PLC system environment can be achieved by simulating the operation of a CS/CJ Series PLC with a virtual PLC in the computer. CX-Simulator makes it possible to evaluate program operation, check the cycle time and reduce debugging time before the actual equipment is assembled.

CX-Designer

CX-Designer is used to create screen data for NS-series Programmable Terminals. CX-Designer can also check the operation of the created screen data on the computer. CX-Designer enables efficient development process for screen creation, simulation and project deployment. Users can develop screens more efficiently with Easy-to-use Support Software. CX-Designer has about 1,000 standard functional objects with associated graphics and advanced functions, so even first-time users can create screens easily just by arranging functional objects in a screen.

Networks

CX-Integrator

CX-Integrator is the main configuration software for CX-One. It enables easy performance of many operations, such as monitoring the connection status of various networks, setting parameters, and diagnosing networks.

CX-ConfiguratorFDT

Based on FDT/DTM technology, CX-ConfiguratorFDT can be used to configure devices from any vendor connected to a PROFIBUS network. This concept will later be expanded to support many more networks using this technology.

Motion & Drives

CX-Motion

CX-Motion can be used to create, edit, and print the various parameters, position data, and motion control programs (G code) required to operate Motion Controllers, transfer the data to the Motion Control units, and monitor operation of the Motion Control units. Increase productivity in every step of the motion control process, from development of the motion control program to system operation.

CX-Drive

The complete current range of Omron Yaskawa inverters and servos is covered in this software with full access to all parameters (with 3 different operator levels available). An easy overview of parameters is also included which includes filters to show values that are: different from default, different from inverter, invalid setting. Graphical overviews are available to further assist with configuration of some more detailed parameters such as jump frequencies, v/f profiles and analog setting.

CX-Position

CX-Position simplifies every aspect of position control, from creating/editing the data used in Position Control units (NC units) to communicating online and monitoring operation. The software is equipped with functions that can improve productivity, such as automatically generating project data and reusing existing data.

Regulation and Switching

CX-Thermo

Omron’s CX-Thermo support software has been specially developed for use with the company’s E5CN, E5EN, E5GN, E5AN, E5CN-H, E5EN-H, E5AN-H, E5ZN, E5AR, E5ER and CelciuXº temperature controllers. CX-Thermo enables faster parameter set-up, easier device adjustment and simpler maintenance. It dramatically reduces the time and effort needed to set and manage temperature control parameters.

CX-Process

CX-Process simplifies every aspect of loop control, from creating/transferring function blocks to running the Boards/units and debugging (tuning PID parameters, etc.) operation. Function block programs can be created easily by pasting function blocks in the window and making software connections with the mouse.

Sensing

CX-Sensor

CX-Sensor allows configuration and monitoring of Omron’s ZX range of sensors via a series of easy to use displays. The graphing dialog allows the outputs from several sensors to be reviewed and compared simultaneously, allowing configuration of complex processes. The software also includes a driver that allows sensor data to be accessed via an Omron serial control unit (SCU) and from other Omron applications such as CX-Supervisor. With the aid of Omron’s CX-Server OPC application it is even possible to monitor sensor data in real time from Microsoft Excel.