Açıklama

Omron NX102-9000; Küçültülmüş boyutlu kontrolörde Bilgi ve Verimlilik

Omron NX102-9000 serisi modüler makine kontrolörü; lojik kontrolü, hareket ve bilgi fonksiyonlarını sunar. Üretim ve IT dünyalarını bir araya getiren NX1, aracı yazılımı engellerken mühendislik ve bakım işlemlerini azaltır.

IoT Uyumlu: OPC UA sunucusu standart özellik olarak bulunur, farklı yapılar desteklenir
Doğrudan veritabanı bağlantısı: Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird ve PostgreSQL sunucusu için SQL istemcisi
Veri işleme için geniş bellek. Değişkenler için 33,5 MB
Pilsiz kontrolör
Döngü süresi: 1 ms’den itibaren
12 eksene kadar (8 senkronize hareket ekseni ve 4 PTP)
Yerel ve uzak G/Ç, EtherCAT aygıtları ve hareket kontrolü için tek bir eşsiz ve senkronize döngü
Multi-tasking kontrolör
Genişletilmiş ağ bağlantısı, 2 adet Ethernet portu + 1 EtherCAT
Güvenlik ve IO-Link master dahil 32 adede kadar yerel NX ünitesi
64 adede kadar EtherCAT node (400xNX ünitesi) desteği

Özellikler ve sipariş bilgisi

Ordering information

NX1 series CPU units

CPU	Program capacity	Variables capacity	Number of axes			Functionalities				Order code
CPU	Program capacity	Variables capacity	Real axes	Motion control servo axes	Single-axis position control axes	Sequence	OPC UA	Motion	DB connection	Order code
NX102	5 MB	1.5 MB: Retained 32 MB: Not retained	12 axes	8 axes	4 axes	■	■	■	■	NX102-1220
			12 axes	8 axes		■	■	■	–	NX102-1200
			8 axes	4 axes		■	■	■	■	NX102-1120
			8 axes	4 axes		■	■	■	–	NX102-1100
			6 axes	2 axes		■	■	■	■	NX102-1020
			6 axes	2 axes		■	■	■	–	NX102-1000
			4 axes	0 axes		■	■	–	■	NX102-9020
			4 axes	0 axes		■	■	–	–	NX102-9000

Note:The end cover unit NX-END02 is included with the CPU unit.

NX I/O units (local and remote I/O)

Up to 32 local NX I/O units can be connected to an NX1 CPU unit.

Communication and control units

Module Type	Protocol	Connection	Specification	Width	Order code
Communication coupler	EtherCAT Slave	2 RJ45 ports (in + out)	Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A	46 mm	NX-ECC203
Safety controller	FSoE Protocol	128 Safety connections	For up to 1,024 safety I/O points	30 mm	NX-SL3500
32 Safety connections	For up to 256 safety I/O points	NX-SL3300

Module Type

Protocol

Connection

Specification

Width

Order code

Communication coupler

EtherCAT Slave

2 RJ45 ports

(in + out)

Up to 63 I/O units.

Max. 1,024 bytes in + 1,024 bytes out

Supports distributed clock

I/O power supply up to 10 A

46 mm

NX-ECC203

Safety controller

FSoE Protocol

128 Safety connections

For up to 1,024 safety I/O points

30 mm

NX-SL3500

32 Safety connections

For up to 256 safety I/O points

NX-SL3300

IO-Link master unit

Module Type	No. of ports	I/O refresh method	Connection type 2	Width	Order code
IO-Link master unit	4	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-ILM400

Note:For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.

Digital I/O units

Module type	Channels, Signal type	Performance 2 , I/O Refresh Mode	Connection type 2	Width	Order code	NPN-type 2
AC Digital Input	4 inputs, 200 to 240 VAC, 50/60 Hz	Free Run	Screwless push-in (NX-TBA082)	12 mm	NX-IA3117	–
Safety Digital Input	4 inputs + 2 test outputs	Free Run	Screwless push-in (NX-TBA082)	12 mm	NX-SIH400	–
Safety Digital Input	8 inputs + 2 test outputs	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-SID800	–
DC Digital Input	4 inputs, 3-wire connection	High-speed Synchronous Time Stamp	Screwless push-in (NX-TBA122)	12 mm	NX-ID3444	NX-ID3344
		High-speed Synchronous/Free Run			NX-ID3443	NX-ID3343
		Synchronous/Free Run			NX-ID3417	NX-ID3317
	8 inputs, 2-wire connection		Screwless push-in (NX-TBA162)		NX-ID4442	NX-ID4342
	16 inputs, 1-wire connection		Screwless push-in (NX-TBA162)		NX-ID5442	NX-ID5342
			1 × 20-pin MIL connector	30 mm	NX-ID5142-5	same
			M3 screw		NX-ID5142-1	same
	32 inputs, 1-wire connection		1 × 40-pin MIL connector		NX-ID6142-5	same
	32 inputs, 1-wire connection		1 × 40-pin Fujitsu connector		NX-ID6142-6	same
DC Digital I/O	16 inputs + 16 outputs 0.5 A, 1-wire connection + common	Synchronous/Free Run	2 × 20-pin MIL connector	30 mm	NX-MD6256-5	NX-MD6121-5
DC Digital I/O	16 inputs + 16 outputs 0.5 A, 1-wire connection + common	Synchronous/Free Run	2 × 24-pin Fujitsu connector	30 mm	–	NX-MD6121-6
DC Digital Output	2 outputs 0.5 A, 3-wire connection	High-speed Synchronous Time Stamp	Screwless push-in (NX-TBA082)	12 mm	NX-OD2258	NX-OD2154
	4 outputs 0.5 A, 3-wire connection	High-speed Synchronous/Free Run	Screwless push-in (NX-TBA122)		NX-OD3257	NX-OD3153
	4 outputs 0.5 A, 3-wire connection	Synchronous/Free Run	Screwless push-in (NX-TBA122)		NX-OD3256	NX-OD3121
	4 outputs 2 A/point, 8 A total, 3-wire connection		Screwless push-in (NX-TBA162)		NX-OD3268	–
	8 outputs 0.5 A, 2-wire connection				NX-OD4256	NX-OD4121
	16 outputs 0.5 A, 1-wire connection				NX-OD5256	NX-OD5121
			1 × 20-pin MIL connector	30 mm	NX-OD5256-5	NX-OD5121-5
			M3 screw		NX-OD5256-1	NX-OD5121-1
	32 outputs 0.5 A, 1-wire connection		1 × 40-pin MIL connector		NX-OD6256-5	NX-OD6121-5
	32 outputs 0.5 A, 1-wire connection		1 × 40-pin Fujitsu connector		–	NX-OD6121-6
Safety Digital Output	2 outputs, 2.0 A	Free Run	Screwless push-in (NX-TBA082)	12 mm	NX-SOH200	–
Safety Digital Output	4 outputs, 0.5 A	Free Run	Screwless push-in (NX-TBA082)	12 mm	NX-SOD400	–
Relay Digital Output	2 outputs, N.O., 2.0 A	Free Run	Screwless push-in (NX-TBA082)	12 mm	NX-OC2633	–
	8 outputs, N.O., 2.0 A		Screwless push-in (NX-TBA082 × 2)	24 mm	NX-OC4633	–
	2 outputs, N.O.+ N.C., 2.0 A		Screwless push-in (NX-TBA082)	12 mm	NX-OC2733	–

Analog I/O units

Module type	Signal type	Performance, I/O Refresh Mode	Channels	Connection type 2	Width	Order code
Temperature Sensor -Input	Thermocouple type B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII	0.1°C resolution, 200 ms/unit Free Run	2	Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory	12 mm	NX-TS2101
		0.1°C resolution, 200 ms/unit Free Run	4		24 mm	NX-TS3101
		0.01°C resolution, 10 ms/unit Free Run	2		12 mm	NX-TS2102
		0.01°C resolution, 10 ms/unit Free Run	4		24 mm	NX-TS3102
		0.001°C resolution, 60 ms/unit Free Run	2		12 mm	NX-TS2104
		0.001°C resolution, 60 ms/unit Free Run	4		24 mm	NX-TS3104
	RTD type Pt100 (3-wire), Pt1000, Ni508.4	0.1°C resolution, 200 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2201
		0.1°C resolution, 200 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3201
		0.01°C resolution, 10 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2202
		0.01°C resolution, 10 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3202
		0.001°C resolution, 60 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2204
		0.001°C resolution, 60 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3204
Analog Input	4 to 20 mA single ended	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2203
			4	Screwless push-in (NX-TBA122)		NX-AD3203
			8	Screwless push-in (NX-TBA162)		NX-AD4203
	4 to 20 mA differential	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)		NX-AD2204
			4	Screwless push-in (NX-TBA122)		NX-AD3204
			8	Screwless push-in (NX-TBA162)		NX-AD4204
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)		NX-AD2208
			4	Screwless push-in (NX-TBA122)		NX-AD3208
			8	Screwless push-in (NX-TBA162)		NX-AD4208
	–10 to 10 V single ended	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)		NX-AD2603
			4	Screwless push-in (NX-TBA122)		NX-AD3603
			8	Screwless push-in (NX-TBA162)		NX-AD4603
	–10 to 10 V differential	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)		NX-AD2604
			4	Screwless push-in (NX-TBA122)		NX-AD3604
			8	Screwless push-in (NX-TBA162)		NX-AD4604
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)		NX-AD2608
			4	Screwless push-in (NX-TBA122)		NX-AD3608
			8	Screwless push-in (NX-TBA162)		NX-AD4608
High-Speed Analog Input	–10 to 10 V, –5 to 5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA differential	–10 to 10 V or –5 to 5 V: 1/64000 Other input range: 1/32000 5 µs/channel Synchronous	4 (NPN)	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-HAD401
High-Speed Analog Input			4 (PNP)	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-HAD402
Analog Output	4 to 20 mA	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-DA2203
		1/8000 resolution, 250 µs/channel Free Run	4	Screwless push-in (NX-TBA122)		NX-DA3203
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)		NX-DA2205
		1/30000 resolution,10 µs/channel Synchronous/Free Run	4	Screwless push-in (NX-TBA122)		NX-DA3205
	–10 to 10 V	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)		NX-DA2603
		1/8000 resolution, 250 µs/channel Free Run	4	Screwless push-in (NX-TBA122)		NX-DA3603
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)		NX-DA2605
		1/30000 resolution,10 µs/channel Synchronous/Free Run	4	Screwless push-in (NX-TBA122)		NX-DA3605

Temperature control units

Module type	Conversion time, I/O Refresh Mode	Channels	Input type	Output type	Output capacity	CT Input capacity	Control type	Connection type 2	Width	Order code
Temperature control	50 ms Free run	2	Multi-input (Thermocouple and Resistance thermometer)	Voltage output (for driving SSR)	2 points	2 points	Standard	Screwless push-in (NX-TBA162)	12 mm	NX-TC2405
					2 points	–	Standard			NX-TC2406
					4 points		Heating and Cooling			NX-TC2407
				Linear current output	2 points		Standard			NX-TC2408
		4		Voltage output (for driving SSR)	4 points	4 points	Standard	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TC3405
					4 points	–	Standard			NX-TC3406
					8 points		Heating and Cooling			NX-TC3407
				Linear current output	4 points		Standard			NX-TC3408

Heater burnout detection units

Module type	Channels, signal type	Control output	I/O refresh method	Connection type 2	Width	Order code
Heater burnout detection	4 CT inputs 4 control outputs	NPN, 12 to 24 VDC 0.1 A/point, 0.4 A/unit	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-HB3101
Heater burnout detection	4 CT inputs 4 control outputs	PNP 24 VDC 0.1 A/point, 0.4 A/unit	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-HB3201

Load cell input unit

Module type	Specifications	Excitation voltage/input range	I/O refresh method	Connection type 2	Width	Order code
Load cell input	1 load cell input, 125 µs conversion cycle	5 VDC ±10%/–5 to 5 mV/V	Synchronous/ Free Run	Screwless push-in (NX-TBC162)	12 mm	NX-RS1201

Position control units

Module type	Channels, Signal type	Performance 2 , I/O Refresh Mode	Connection type 2	Width	Order code	NPN-type 2
Encoder Input	1 SSI encoder, 2 MHz	Synchronous/Free Run	Screwless push-in (NX-TBA122)	12 mm	NX-ECS112	–
	2 SSI encoders, 2 MHz		Screwless push-in (NX-TBA122)	12 mm	NX-ECS212	–
	1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs)		Screwless push-in (NX-TBA122 + NX-TBB122)	24 mm	NX-EC0142	NX-EC0132
	1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs)		Screwless push-in (NX-TBA162)	12 mm	NX-EC0122	NX-EC0112
	2 incremental encoders open collector 500 kHz		Screwless push-in (NX-TBA122)	12 mm	NX-EC0222	NX-EC0212
Pulse Output	1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs)	Synchronous	Screwless push-in (NX-TBA162)	12 mm	NX-PG0122	NX-PG0112
	2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel		1 × 34-pin MIL connector	30 mm	NX-PG0242-5	NX-PG0232-5
	4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel		2 × 34-pin MIL connector	30 mm	NX-PG0342-5	NX-PG0332-5

Serial communication interface units

Module type	Channels, Signal type	Performance 2 , I/O Refresh Mode	Connection type 2	Width	Order code	NPN-type 2
Serial Communication	1 × RS-422A/485	Free Run	Screwless push-in (NX-TBC162)	12 mm	NX-CIF105	–
1 × RS-232C	NX-CIF101	–
2 × RS-232C	9-pin D-sub	30 mm	NX-CIF210	–

Module type

Channels, Signal type

Performance

, I/O Refresh Mode

Connection type

Width

Order code

NPN-type

Serial Communication

1 × RS-422A/485

Free Run

Screwless push-in (NX-TBC162)

12 mm

NX-CIF105

–

1 × RS-232C

NX-CIF101

–

2 × RS-232C

9-pin D-sub

30 mm

NX-CIF210

–

Other units

Module type	Description	Connection type 2	Width	Order code
Power Unit	NX bus power supply unit, 24 V DC input, non-isolated	Screwless push-in (NX-TBC082)	12 mm	NX-PD1000
	I/O power feed unit, for separation of power groups, up to 10 A	Screwless push-in (NX-TBA082)		NX-PF0730
	I/O power connection unit, 16 × IOV	Screwless push-in (NX-TBA162)		NX-PC0020
	I/O power connection unit, 16 × IOG			NX-PC0010
	I/O power connection, 8 × IOV + 8 x IOG			NX-PC0030
System Units and -Accessories	Grounding terminal, 16 points	Screwless push-in (NX-TBC162)		NX-TBX01
	End cover (included with Communication Coupler)	–		NX-END01
	Replacement front connector with 8 wiring terminals (marked A+B)	Screwless push-in		NX-TBA082
	Replacement front connector with 12 wiring terminals (marked A+B)			NX-TBA122
	Replacement front connector with 16 wiring terminals (marked A+B)			NX-TBA162
	Replacement front connector with 12 wiring terminals (marked C+D)			NX-TBB122
	Replacement front connector with 16 wiring terminals (marked C+D)			NX-TBB162
	Replacement front connector with 8 wiring terminals (marked A+B+FG)			NX-TBC082
	Replacement front connector with 16 wiring terminals (marked A+B+FG)			NX-TBC162
	DIN rail insulation spacers, set of 3 pcs		–	NX-AUX01
	30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units)		–	NX-AUX02

Recommended EtherCAT and EtherNet/IP communication cables

Item			Manufacturer	Color	Cable length (m)	Order code
EtherCAT cable	Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCAT communications	Standard type Cable with connectors on both ends (M12 straight/M12 straight)	OMRON	Black	0.5	XS5W-T421-BM2-SS
					1	XS5W-T421-CM2-SS
					2	XS5W-T421-DM2-SS
					3	XS5W-T421-EM2-SS
					5	XS5W-T421-GM2-SS
					10	XS5W-T421-JM2-SS
		Rugged type Cable with connectors on both ends (M12 straight/RJ45)		Black	0.5	XS5W-T421-BMCSS
					1	XS5W-T421-CMC-SS
					2	XS5W-T421-DMC-SS
					3	XS5W-T421-EMC-SS
					5	XS5W-T421-GMC-SS
					10	XS5W-T421-JMC-SS
Ethernet/EtherCAT patch cable	Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH 2 ^, 2	Standard type Cable with connectors on both ends (RJ45/RJ45)		Yellow	0.2	XS6W-6LSZH8SS20CM-Y
					0.3	XS6W-6LSZH8SS30CM-Y
					0.5	XS6W-6LSZH8SS50CM-Y
					1	XS6W-6LSZH8SS100CM-Y
					1.5	XS6W-6LSZH8SS150CM-Y
					2	XS6W-6LSZH8SS200CM-Y
					3	XS6W-6LSZH8SS300CM-Y
					5	XS6W-6LSZH8SS500CM-Y
					7.5	XS6W-6LSZH8SS750CM-Y
					10	XS6W-6LSZH8SS1000CM-Y
					15	XS6W-6LSZH8SS1500CM-Y
					20	XS6W-6LSZH8SS2000CM-Y
				Green	0.2	XS6W-6LSZH8SS20CM-G
					0.3	XS6W-6LSZH8SS30CM-G
					0.5	XS6W-6LSZH8SS50CM-G
					1	XS6W-6LSZH8SS100CM-G
					1.5	XS6W-6LSZH8SS150CM-G
					2	XS6W-6LSZH8SS200CM-G
					3	XS6W-6LSZH8SS300CM-G
					5	XS6W-6LSZH8SS500CM-G
					7.5	XS6W-6LSZH8SS750CM-G
					10	XS6W-6LSZH8SS1000CM-G
					15	XS6W-6LSZH8SS1500CM-G
					20	XS6W-6LSZH8SS2000CM-G
	Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR 2	Standard type Cable with connectors on both ends (RJ45/RJ45)		Green	0.5	XS6W-5PUR8SS50CM-G
					1	XS6W-5PUR8SS100CM-G
					1.5	XS6W-5PUR8SS150CM-G
					2	XS6W-5PUR8SS200CM-G
					3	XS6W-5PUR8SS300CM-G
					5	XS6W-5PUR8SS500CM-G
					7.5	XS6W-5PUR8SS750CM-G
					10	XS6W-5PUR8SS1000CM-G
					15	XS6W-5PUR8SS1500CM-G
					20	XS6W-5PUR8SS2000CM-G
	Cat 5e, AWG22, 2-pair cable	Rugged type Cable with connectors on both ends (RJ45/RJ45)	OMRON	Grey	0.3	XS5W-T421-AMD-K
					0.5	XS5W-T421-BMD-K
					1	XS5W-T421-CMD-K
					2	XS5W-T421-DMD-K
					3	XS5W-T421-EMD-K
					5	XS5W-T421-GMD-K
					10	XS5W-T421-JMD-K
					15	XS5W-T421-KMD-K
		Rugged type Cable with connectors on both ends (M12 straight/RJ45)		Grey	0.3	XS5W-T421-AMC-K
					0.5	XS5W-T421-BMC-K
					1	XS5W-T421-CMC-K
					2	XS5W-T421-DMC-K
					3	XS5W-T421-EMC-K
					5	XS5W-T421-GMC-K
					10	XS5W-T421-JMC-K
					15	XS5W-T421-KMC-K
Ethernet/EtherCAT patch cable	Cat 5e, AWG22, 2-pair cable	Rugged type Cable with connectors on both ends (M12 L right angle/RJ45)	OMRON	Grey	0.3	XS5W-T422-AMC-K
					0.5	XS5W-T422-BMC-K
					1	XS5W-T422-CMC-K
					2	XS5W-T422-DMC-K
					3	XS5W-T422-EMC-K
					5	XS5W-T422-GMC-K
					10	XS5W-T422-JMC-K
					15	XS5W-T422-KMC-K
Ethernet -installation -cable	Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR)		Weidmüller	Green	100	WM IE-5IC4x2xAWG24/1-PUR
Ethernet -installation -cable	Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR)			Green	100	WM IE-5IC4x2xAWG26/7-PUR
Connectors	RJ45 metallic connector For AWG22 to AWG26			–	–	WM IE-T0-RJ45-FH-BK
Connectors	RJ45 plastic connector For AWG22 to AWG24		OMRON	–	–	XS6G-T421-1
RJ45 socket	DIN-rail mount socket to terminate installation cable in the -cabinet		Weidmüller	–	–	WM IE-T0-RJ45-FJ-B

Note:Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.

Accessories

Specifications			Order code
EtherCAT junction slaves	3 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.08 A		GX-JC03
EtherCAT junction slaves	6 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.17 A		GX-JC06
Industrial switching hubs (for EtherNet/IP and Ethernet)	Quality of Service (QoS): EtherNet/IP control data priority. Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation Current consumption: 0.22 A	3 ports Power supply connector included	W4S1-03B
		5 ports Power supply connector included	W4S1-05B
		5 ports Power supply connector and connector for informing error -included	W4S1-05C
SD memory card	2 GB		HMC-SD291
SD memory card	4 GB		HMC-SD491
DIN track	Length: 0.5 m; height: 7.3 mm		PFP-50N
	Length: 1 m; height: 7.3 mm		PFP-100N
	Length: 1 m; height: 16 mm		PFP-100N2
End plate to secure the units on the DIN rail			PFP-M (2 pcs)
Battery for NX/NJ CPU unit			CJ1W-BAT01
End cover	End cover for NX1 and NX1P CPU units (Provided with the CPU unit)		NX-END02
End cover	End cover for EtherCAT communication coupler unit (Provided with the EtherCAT communication coupler unit)		NX-END01

Computer software

Specifications	Order code
Sysmac Studio Lite Edition 2 version 1.23 or higher	SYSMAC-LE____ 2

Specifications

Order code

Sysmac Studio Lite Edition

version 1.23 or higher

SYSMAC-LE____

Omron NX102-9000

Açıklama

Omron NX102-9000; Küçültülmüş boyutlu kontrolörde Bilgi ve Verimlilik

Özellikler ve sipariş bilgisi

Ordering information

NX1 series CPU units