Omron NX1

Satışla iletişime geçin

(0216) 540 59 91

Fiyat Teklifi İsteyin

Açıklama

Küçültülmüş boyutlu kontrolörde Bilgi ve Verimlilik

NX1 serisi modüler makine kontrolörü; lojik kontrolü, hareket ve bilgi fonksiyonlarını sunar. Üretim ve IT dünyalarını bir araya getiren NX1, aracı yazılımı engellerken mühendislik ve bakım işlemlerini azaltır.

  • IoT Uyumlu: OPC UA sunucusu standart özellik olarak bulunur, farklı yapılar desteklenir
  • Doğrudan veritabanı bağlantısı: Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird ve PostgreSQL sunucusu için SQL istemcisi
  • Veri işleme için geniş bellek. Değişkenler için 33,5 MB
  • Pilsiz kontrolör
  • Döngü süresi: 1 ms’den itibaren
  • 12 eksene kadar (8 senkronize hareket ekseni ve 4 PTP)
  • Yerel ve uzak G/Ç, EtherCAT aygıtları ve hareket kontrolü için tek bir eşsiz ve senkronize döngü
  • Multi-tasking kontrolör
  • Genişletilmiş ağ bağlantısı, 2 adet Ethernet portu + 1 EtherCAT
  • Güvenlik ve IO-Link master dahil 32 adede kadar yerel NX ünitesi
  • 64 adede kadar EtherCAT node (400xNX ünitesi) desteği

Özellikler ve sipariş bilgisi

Ordering information

NX1 series CPU units

CPUProgram capacityVariables capacityNumber of axesFunctionalitiesOrder code
Real axesMotion control servo axesSingle-axis position control axesSequenceOPC UAMotionDB connection
NX1025 MB1.5 MB: Retained

32 MB: Not retained

12 axes8 axes4 axesNX102-1220
NX102-1200
8 axes4 axesNX102-1120
NX102-1100
6 axes2 axesNX102-1020
NX102-1000
4 axes0 axesNX102-9020
NX102-9000
Note:The end cover unit NX-END02 is included with the CPU unit.

NX I/O units (local and remote I/O)

Up to 32 local NX I/O units can be connected to an NX1 CPU unit.

Communication and control units

Module TypeProtocolConnectionSpecificationWidthOrder code
Communication couplerEtherCAT Slave2 RJ45 ports

(in + out)

Up to 63 I/O units.

Max. 1,024 bytes in + 1,024 bytes out

Supports distributed clock

I/O power supply up to 10 A

46 mmNX-ECC203
Safety controllerFSoE Protocol128 Safety connectionsFor up to 1,024 safety I/O points30 mmNX-SL3500
32 Safety connectionsFor up to 256 safety I/O pointsNX-SL3300

IO-Link master unit

Module TypeNo. of portsI/O refresh methodConnection type

WidthOrder code
IO-Link master unit4Free RunScrewless push-in (NX-TBA162)12 mmNX-ILM400
Note:For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.

Digital I/O units

Module typeChannels, Signal typePerformance

, I/O Refresh Mode

Connection type

WidthOrder codeNPN-type

AC Digital Input4 inputs, 200 to 240 VAC, 50/60 HzFree RunScrewless push-in (NX-TBA082)12 mmNX-IA3117
Safety Digital Input4 inputs + 2 test outputsFree RunScrewless push-in (NX-TBA082)12 mmNX-SIH400
8 inputs + 2 test outputsScrewless push-in (NX-TBA162)NX-SID800
DC Digital Input4 inputs, 3-wire connectionHigh-speed Synchronous Time StampScrewless push-in (NX-TBA122)12 mmNX-ID3444NX-ID3344
High-speed Synchronous/Free RunNX-ID3443NX-ID3343
Synchronous/Free RunNX-ID3417NX-ID3317
8 inputs, 2-wire connectionScrewless push-in (NX-TBA162)NX-ID4442NX-ID4342
16 inputs, 1-wire connectionNX-ID5442NX-ID5342
1 × 20-pin MIL connector30 mmNX-ID5142-5same
M3 screwNX-ID5142-1same
32 inputs, 1-wire connection1 × 40-pin MIL connectorNX-ID6142-5same
1 × 40-pin Fujitsu connectorNX-ID6142-6same
DC Digital I/O16 inputs + 16 outputs 0.5 A, 1-wire connection + commonSynchronous/Free Run2 × 20-pin MIL connector30 mmNX-MD6256-5NX-MD6121-5
2 × 24-pin Fujitsu connectorNX-MD6121-6
DC Digital Output2 outputs 0.5 A, 3-wire connectionHigh-speed Synchronous Time StampScrewless push-in (NX-TBA082)12 mmNX-OD2258NX-OD2154
4 outputs 0.5 A, 3-wire connectionHigh-speed Synchronous/Free RunScrewless push-in (NX-TBA122)NX-OD3257NX-OD3153
Synchronous/Free RunNX-OD3256NX-OD3121
4 outputs 2 A/point, 8 A total, 3-wire connectionScrewless push-in (NX-TBA162)NX-OD3268
8 outputs 0.5 A, 2-wire connectionNX-OD4256NX-OD4121
16 outputs 0.5 A, 1-wire connectionNX-OD5256NX-OD5121
1 × 20-pin MIL connector30 mmNX-OD5256-5NX-OD5121-5
M3 screwNX-OD5256-1NX-OD5121-1
32 outputs 0.5 A, 1-wire connection1 × 40-pin MIL connectorNX-OD6256-5NX-OD6121-5
1 × 40-pin Fujitsu connectorNX-OD6121-6
Safety Digital Output2 outputs, 2.0 AFree RunScrewless push-in (NX-TBA082)12 mmNX-SOH200
4 outputs, 0.5 ANX-SOD400
Relay Digital Output2 outputs, N.O., 2.0 AFree RunScrewless push-in (NX-TBA082)12 mmNX-OC2633
8 outputs, N.O., 2.0 AScrewless push-in (NX-TBA082 × 2)24 mmNX-OC4633
2 outputs, N.O.+ N.C., 2.0 AScrewless push-in (NX-TBA082)12 mmNX-OC2733

Analog I/O units

Module typeSignal typePerformance, I/O Refresh ModeChannelsConnection type

WidthOrder code
Temperature Sensor -InputThermocouple type
B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII
0.1°C resolution, 200 ms/unit
Free Run
2Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory12 mmNX-TS2101
424 mmNX-TS3101
0.01°C resolution, 10 ms/unit
Free Run
212 mmNX-TS2102
424 mmNX-TS3102
0.001°C resolution, 60 ms/unit
Free Run
212 mmNX-TS2104
424 mmNX-TS3104
RTD type
Pt100 (3-wire), Pt1000, Ni508.4
0.1°C resolution, 200 ms/unit
Free Run
2Screwless push-in (NX-TBA162)12 mmNX-TS2201
4Screwless push-in
(NX-TBA162 + NX-TBB162)
24 mmNX-TS3201
0.01°C resolution, 10 ms/unit
Free Run
2Screwless push-in (NX-TBA162)12 mmNX-TS2202
4Screwless push-in
(NX-TBA162 + NX-TBB162)
24 mmNX-TS3202
0.001°C resolution, 60 ms/unit
Free Run
2Screwless push-in (NX-TBA162)12 mmNX-TS2204
4Screwless push-in
(NX-TBA162 + NX-TBB162)
24 mmNX-TS3204
Analog Input4 to 20 mA
single ended
1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)12 mmNX-AD2203
4Screwless push-in (NX-TBA122)NX-AD3203
8Screwless push-in (NX-TBA162)NX-AD4203
4 to 20 mA
differential
1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)NX-AD2204
4Screwless push-in (NX-TBA122)NX-AD3204
8Screwless push-in (NX-TBA162)NX-AD4204
1/30000 resolution,10 µs/channel
Synchronous/Free Run
2Screwless push-in (NX-TBA082)NX-AD2208
4Screwless push-in (NX-TBA122)NX-AD3208
8Screwless push-in (NX-TBA162)NX-AD4208
–10 to 10 V
single ended
1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)NX-AD2603
4Screwless push-in (NX-TBA122)NX-AD3603
8Screwless push-in (NX-TBA162)NX-AD4603
–10 to 10 V
differential
1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)NX-AD2604
4Screwless push-in (NX-TBA122)NX-AD3604
8Screwless push-in (NX-TBA162)NX-AD4604
1/30000 resolution,10 µs/channel
Synchronous/Free Run
2Screwless push-in (NX-TBA082)NX-AD2608
4Screwless push-in (NX-TBA122)NX-AD3608
8Screwless push-in (NX-TBA162)NX-AD4608
High-Speed Analog Input–10 to 10 V, –5 to 5 V, 0 to 10 V,
0 to 5 V, 1 to 5 V, 0 to 20 mA,
4 to 20 mA
differential
–10 to 10 V or –5 to 5 V: 1/64000
Other input range: 1/32000
5 µs/channel
Synchronous
4 (NPN)Screwless push-in
(NX-TBA162 + NX-TBB162)
24 mmNX-HAD401
4 (PNP)NX-HAD402
Analog Output4 to 20 mA1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)12 mmNX-DA2203
4Screwless push-in (NX-TBA122)NX-DA3203
1/30000 resolution,10 µs/channel
Synchronous/Free Run
2Screwless push-in (NX-TBA082)NX-DA2205
4Screwless push-in (NX-TBA122)NX-DA3205
–10 to 10 V1/8000 resolution, 250 µs/channel
Free Run
2Screwless push-in (NX-TBA082)NX-DA2603
4Screwless push-in (NX-TBA122)NX-DA3603
1/30000 resolution,10 µs/channel
Synchronous/Free Run
2Screwless push-in (NX-TBA082)NX-DA2605
4Screwless push-in (NX-TBA122)NX-DA3605

Temperature control units

Module typeConversion time,
I/O Refresh Mode
ChannelsInput typeOutput typeOutput capacityCT Input capacityControl typeConnection type

WidthOrder code
Temperature control50 ms

Free run

2Multi-input (Thermocouple and
Resistance thermometer)
Voltage output (for driving SSR)2 points2 pointsStandardScrewless push-in (NX-TBA162)12 mmNX-TC2405
NX-TC2406
4 pointsHeating and CoolingNX-TC2407
Linear current output2 pointsStandardNX-TC2408
4Voltage output (for driving SSR)4 points4 pointsStandardScrewless push-in (NX-TBA162 +
NX-TBB162)
24 mmNX-TC3405
NX-TC3406
8 pointsHeating and CoolingNX-TC3407
Linear current output4 pointsStandardNX-TC3408

Heater burnout detection units

Module typeChannels, signal typeControl outputI/O refresh methodConnection type

WidthOrder code
Heater burnout detection4 CT inputs
4 control outputs
NPN, 12 to 24 VDC
0.1 A/point, 0.4 A/unit
Free RunScrewless push-in (NX-TBA162)12 mmNX-HB3101
PNP 24 VDC
0.1 A/point, 0.4 A/unit
NX-HB3201

Load cell input unit

Module typeSpecificationsExcitation voltage/input rangeI/O refresh methodConnection type

WidthOrder code
Load cell input1 load cell input, 125 µs conversion cycle5 VDC ±10%/–5 to 5 mV/VSynchronous/
Free Run
Screwless push-in (NX-TBC162)12 mmNX-RS1201

Position control units

Module typeChannels, Signal typePerformance

, I/O Refresh Mode

Connection type

WidthOrder codeNPN-type

Encoder Input1 SSI encoder, 2 MHzSynchronous/Free RunScrewless push-in (NX-TBA122)12 mmNX-ECS112
2 SSI encoders, 2 MHzNX-ECS212
1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs)Screwless push-in
(NX-TBA122 + NX-TBB122)
24 mmNX-EC0142NX-EC0132
1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs)Screwless push-in (NX-TBA162)12 mmNX-EC0122NX-EC0112
2 incremental encoders open collector 500 kHzScrewless push-in (NX-TBA122)NX-EC0222NX-EC0212
Pulse Output1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs)SynchronousScrewless push-in (NX-TBA162)12 mmNX-PG0122NX-PG0112
2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel1 × 34-pin MIL connector30 mmNX-PG0242-5NX-PG0232-5
4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel2 × 34-pin MIL connectorNX-PG0342-5NX-PG0332-5

Serial communication interface units

Module typeChannels, Signal typePerformance

, I/O Refresh Mode

Connection type

WidthOrder codeNPN-type

Serial Communication1 × RS-422A/485Free RunScrewless push-in (NX-TBC162)12 mmNX-CIF105
1 × RS-232CNX-CIF101
2 × RS-232C9-pin D-sub30 mmNX-CIF210

Other units

Module typeDescriptionConnection type

WidthOrder code
Power UnitNX bus power supply unit, 24 V DC input, non-isolatedScrewless push-in (NX-TBC082)12 mmNX-PD1000
I/O power feed unit, for separation of power groups, up to 10 AScrewless push-in (NX-TBA082)NX-PF0730
I/O power connection unit, 16 × IOVScrewless push-in (NX-TBA162)NX-PC0020
I/O power connection unit, 16 × IOGNX-PC0010
I/O power connection, 8 × IOV + 8 x IOGNX-PC0030
System Units and -AccessoriesGrounding terminal, 16 pointsScrewless push-in (NX-TBC162)NX-TBX01
End cover (included with Communication Coupler)NX-END01
Replacement front connector with 8 wiring terminals (marked A+B)Screwless push-inNX-TBA082
Replacement front connector with 12 wiring terminals (marked A+B)NX-TBA122
Replacement front connector with 16 wiring terminals (marked A+B)NX-TBA162
Replacement front connector with 12 wiring terminals (marked C+D)NX-TBB122
Replacement front connector with 16 wiring terminals (marked C+D)NX-TBB162
Replacement front connector with 8 wiring terminals (marked A+B+FG)NX-TBC082
Replacement front connector with 16 wiring terminals (marked A+B+FG)NX-TBC162
DIN rail insulation spacers, set of 3 pcsNX-AUX01
30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units)NX-AUX02

Recommended EtherCAT and EtherNet/IP communication cables

ItemManufacturerColorCable length (m)Order code
EtherCAT cableCat 5e, AWG22, 2-pair cable

M12/Smartclick connectors

Improved shield for EtherCAT
communications

Standard type

Cable with connectors on both ends

(M12 straight/M12 straight)Omron NX1

OMRONBlack0.5XS5W-T421-BM2-SS
1XS5W-T421-CM2-SS
2XS5W-T421-DM2-SS
3XS5W-T421-EM2-SS
5XS5W-T421-GM2-SS
10XS5W-T421-JM2-SS
Rugged type

Cable with connectors on both ends

(M12 straight/RJ45)

Omron NX1

Black0.5XS5W-T421-BMCSS
1XS5W-T421-CMC-SS
2XS5W-T421-DMC-SS
3XS5W-T421-EMC-SS
5XS5W-T421-GMC-SS
10XS5W-T421-JMC-SS
Ethernet/EtherCAT
patch cable
Cat 6a, AWG27, 4-pair cable

Cable sheath material: LSZH

,

Standard type

Cable with connectors on both ends (RJ45/RJ45)Omron NX1

Yellow0.2XS6W-6LSZH8SS20CM-Y
0.3XS6W-6LSZH8SS30CM-Y
0.5XS6W-6LSZH8SS50CM-Y
1XS6W-6LSZH8SS100CM-Y
1.5XS6W-6LSZH8SS150CM-Y
2XS6W-6LSZH8SS200CM-Y
3XS6W-6LSZH8SS300CM-Y
5XS6W-6LSZH8SS500CM-Y
7.5XS6W-6LSZH8SS750CM-Y
10XS6W-6LSZH8SS1000CM-Y
15XS6W-6LSZH8SS1500CM-Y
20XS6W-6LSZH8SS2000CM-Y
Green0.2XS6W-6LSZH8SS20CM-G
0.3XS6W-6LSZH8SS30CM-G
0.5XS6W-6LSZH8SS50CM-G
1XS6W-6LSZH8SS100CM-G
1.5XS6W-6LSZH8SS150CM-G
2XS6W-6LSZH8SS200CM-G
3XS6W-6LSZH8SS300CM-G
5XS6W-6LSZH8SS500CM-G
7.5XS6W-6LSZH8SS750CM-G
10XS6W-6LSZH8SS1000CM-G
15XS6W-6LSZH8SS1500CM-G
20XS6W-6LSZH8SS2000CM-G
Cat 5e, AWG26, 4-pair cable

Cable sheath material: PUR

Standard type

Cable with connectors on both ends (RJ45/RJ45)

Omron NX1

Green0.5XS6W-5PUR8SS50CM-G
1XS6W-5PUR8SS100CM-G
1.5XS6W-5PUR8SS150CM-G
2XS6W-5PUR8SS200CM-G
3XS6W-5PUR8SS300CM-G
5XS6W-5PUR8SS500CM-G
7.5XS6W-5PUR8SS750CM-G
10XS6W-5PUR8SS1000CM-G
15XS6W-5PUR8SS1500CM-G
20XS6W-5PUR8SS2000CM-G
Cat 5e, AWG22, 2-pair cableRugged type

Cable with connectors on both ends (RJ45/RJ45)

Omron NX1

OMRONGrey0.3XS5W-T421-AMD-K
0.5XS5W-T421-BMD-K
1XS5W-T421-CMD-K
2XS5W-T421-DMD-K
3XS5W-T421-EMD-K
5XS5W-T421-GMD-K
10XS5W-T421-JMD-K
15XS5W-T421-KMD-K
Rugged type

Cable with connectors on both ends (M12 straight/RJ45)

Omron NX1

Grey0.3XS5W-T421-AMC-K
0.5XS5W-T421-BMC-K
1XS5W-T421-CMC-K
2XS5W-T421-DMC-K
3XS5W-T421-EMC-K
5XS5W-T421-GMC-K
10XS5W-T421-JMC-K
15XS5W-T421-KMC-K
Ethernet/EtherCAT
patch cable
Cat 5e, AWG22, 2-pair cableRugged type

Cable with connectors on both ends (M12 L right angle/RJ45)

Omron NX1

OMRONGrey0.3XS5W-T422-AMC-K
0.5XS5W-T422-BMC-K
1XS5W-T422-CMC-K
2XS5W-T422-DMC-K
3XS5W-T422-EMC-K
5XS5W-T422-GMC-K
10XS5W-T422-JMC-K
15XS5W-T422-KMC-K
Ethernet -installation -cableCat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR)WeidmüllerGreen100WM IE-5IC4x2xAWG24/1-PUR
Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR)Green100WM IE-5IC4x2xAWG26/7-PUR
ConnectorsRJ45 metallic connector

For AWG22 to AWG26

Omron NX1WM IE-T0-RJ45-FH-BK
RJ45 plastic connector

For AWG22 to AWG24

Omron NX1OMRONXS6G-T421-1
RJ45 socketDIN-rail mount socket to terminate installation cable in the -cabinetWeidmüllerWM IE-T0-RJ45-FJ-B
Note:Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.

Accessories

AppearanceSpecificationsOrder code
Omron NX1EtherCAT junction slaves3 ports

Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%)

Current consumption: 0.08 A

GX-JC03
Omron NX16 ports

Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%)

Current consumption: 0.17 A

GX-JC06
Omron NX1Industrial switching hubs
(for EtherNet/IP and Ethernet)
Quality of Service (QoS):

EtherNet/IP control data priority.

Failure detection:

Broadcast storm and LSI error detection

10/100 BASE-TX, Auto-Negotiation

Current consumption: 0.22 A

3 ports

Power supply connector included

W4S1-03B
5 ports

Power supply connector included

W4S1-05B
5 ports

Power supply connector and connector for informing error -included

W4S1-05C
Omron NX1SD memory card2 GBHMC-SD291
4 GBHMC-SD491
Omron NX1DIN trackLength: 0.5 m; height: 7.3 mmPFP-50N
Length: 1 m; height: 7.3 mmPFP-100N
Length: 1 m; height: 16 mmPFP-100N2
Omron NX1End plate to secure the units on the DIN railPFP-M (2 pcs)
Omron NX1Battery for NX/NJ CPU unitCJ1W-BAT01
Omron NX1End coverEnd cover for NX1 and NX1P CPU units

(Provided with the CPU unit)

NX-END02
End cover for EtherCAT communication coupler unit

(Provided with the EtherCAT communication coupler unit)

NX-END01

Computer software

SpecificationsOrder code
Sysmac Studio Lite Edition

version 1.23 or higher

SYSMAC-LE____

Dosya indirme

Broşürler


Veri Sayfası


Kılavuzlar