EN ISO 13849-1IEC 61508 parts 1-7IEC/EN 62061IEC/EN 61131-2
UL
NRAQ (UL61010-1, and UL 61010-2-201)NRAG (UL 121201)NRAQ7 (CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201)
The FSoE protocol was certified for applications in which OMRON FSoE devices are connected to each other. For compatibility with FSoE devices other than OMRON FSoE devices, the customer must validate FSoE communications.
By using GI-S-series safety I/O terminals, you can build a safety control system that meets the followings.
– Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, IEC/EN 62061, (Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems)
– Requirements for PLe (Performance Level e) and for safety category 4 in EN ISO13849-1Also, GI-S-series safety I/O terminals have been registered for conformity to RCM, EAC, and KC (Korean radio regulation).
General Specifications
Item
Specifications
Enclosure
Mounted in a panel (open type)
Operating environment
Ambient operating temperature
0 to 55°C
Ambient operating humidity
10% to 95% (with no condensation or icing)
Atmosphere
Must be free from corrosive gases
Ambient storage temperature
−25 to 70°C (with no condensation or icing)
Altitude
2,000 m max.
Pollution degree
2
Insulation class
CLASS III (SELV)
Overvoltage category
II
EMC immunity level
Zone B: IEC 61131-2
Vibration resistance
Conforms to IEC 60068-2-6
5 to 8.4 Hz with amplitude of 3.5 mm
8.4 to 150 Hz, acceleration of 9.8 m/s2
100 min. in each X, Y, and Z directions (10 sweeps of 10 min. each = 100 min. total)
Shock resistance
Conforms to IEC 60068-2-27
147 m/s2
3 times in each X, Y, and Z directions
Insulation resistance
20 MΩ between isolated circuits (at 100 VDC)
Dielectric strength
500 VAC between isolated circuits for 1 minute at a leakage current of 10 mA max.
Maximum number of clients that can communicate simultaneously: 8/Logical ports
Implicit (I/O) connection
Exclusive Owner (EO) connection
1
EtherNet/IP conformance test
CT9 compliant
Ethernet interface
100BASE-TX
Auto Negotiation
Auto-MDI
Version Information
This section describes the combinations that can be used of the unit versions of the Safety CPU Unit and the Communication Control Unit, Machine Automation Controller, and the version of the Sysmac Studio.
En iyi deneyimleri sağlamak için, cihaz bilgilerini depolamak ve/veya bunlara erişmek için çerezler gibi teknolojiler kullanıyoruz. Bu teknolojilere izin vermek, bu sitedeki tarama davranışı veya benzersiz kimlikler gibi verileri işlememize izin verecektir. Onay vermemek veya onayı geri çekmek, belirli özellikleri ve işlevleri olumsuz etkileyebilir.
Fonksiyonel
Her zaman aktif
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Tercihler
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
İstatistik
Yalnızca istatistiksel amaçlar için kullanılan teknik depolama veya erişim.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Pazarlama
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Son yorumlar