| CJ1W-CIF11 |
RS-485 adaptor, 2 or 4 wire, connects directly to RS-232C 9-pin port for serial PLC link, screw terminals on RS-485 side |
| CJ1W-IC101 |
Expansion I/O control unit, connects to right hand side of CPU |
| CJ1W-II101 |
Expansion I/O interface unit, connects to left hand side of expansion I/O rack, up to 3 expansion racks |
| CJ1W-PA202 |
Power supply unit, 100-240 VAC, output capacity: 14 W |
| CJ1W-PA205R |
Power supply unit, 100-240 VAC, output capacity: 25 W, with RUN output |
| CJ1W-PD022 |
Power supply unit, 24 VDC, output capacity: 19.6 W |
| CJ1W-PD025 |
Power supply unit, 24 VDC, output capacity: 25 W |
| CJ2M-MD211 |
Pulse I/O Module for CJ2M, NPN with 10 inputs (four interrupt/quickresponse and two high-speed counter inputs) and 6 outputs (two pulse and two PWM outputs) |
| CJ2M-MD212 |
Pulse I/O Module for CJ2M, PNP with 10 inputs (four interrupt/quickresponse and two high-speed counter inputs) and 6 outputs (two pulse and two PWM outputs) |
| CP1W-CN221 |
USB Programming cable, A-type male to B-type male, 1.8 m |
| CS1W-CIF31 |
Cable, PC USB to RS-232C converter cable, for Windows 98/ME/2000/XP, drivers included on CD-ROM, an Omron programming cable is also required |
| CS1W-CN223 |
I/O expansion rack connecting cable for NJ/CJ/CS-series, 2 m |
| CS1W-CN713 |
I/O expansion rack connecting cable for NJ/CJ/CS-series, 70 cm |
| CXONE-AL01-EV4 |
Single-user licence for CX-One V4.x software, for Windows 2000/XP/Vista/Windows 7/8 (32 and 64 bit), (requires CDs or DVD, CXOne-CD-EV4, or CXOne-DVD-EV4) |
| HMC-EF183 |
Flash memory card, 128MB |
| HMC-EF283 |
Flash memory card, 256MB |
| HMC-EF583 |
Flash memory card, 512MB |
| XM2S-0911-S003 |
9-pin D-type connector (male) with connector hood with M2.6 x0.45mm pitch retaining screws |
| XW2D-40G6 |
General-purpose I/O terminal block, MIL40 socket, M3 captive screws, 40 points |
| XW2R-P40G-T |
DIN-rail mounting terminal block, MIL40 socket, push-in clamp, 40 points, general-purpose |
| XW2Z-100K |
I/O connection cable, MIL40 to MIL40, 1 m |
| XW2Z-200K |
I/O connection cable, MIL40 to MIL40, 2 m |
| XW2Z-200S-V |
Cable, RS-232C, for programming PLC or HMI 9-pin port from PC 9-pin port, 2 m |
| XW2Z-200T |
Cable, RS-232C, for connecting NT HMI 9-pin port to PLC 9-pin port, 2 m |
Son yorumlar