Model for Sensor Communications Unit
Connector for Sensor Communications Unit
Light source (wavelength)
White LED (420 to 700 nm)
10 to 30 VDC, including 10% ripple (p-p)
Supplied from the connector through the Sensor Communications Unit.
At Power Supply Voltage of 24 VDC
Normal mode: 960 mW max. (Current consumption: 65 mA max.)
Eco function ON: 720 mW max. (Current consumption: 30 mA max.)
Eco function LO: 800 mW max. (Current consumption: 33 mA max.)
Load power supply voltage
30 VDC max., open-collector output
Groups of 1 to 3 Amplifiers: 100 mA max.,
Groups of 4 to 30 Amplifiers: 20 mA max.
At load current of less than 10 mA: 1 V max.
At load current of 10 to 100 mA: 2 V max.
0.1 mA max.
Power supply reverse polarity protection, output short-circuit protection, and output reverse polarity protection
Power supply reverse polarity protection
Contrast Mode: Light intensity discrimination for RGB (initial state/after 2-point tuning) (R+G+B light intensity discrimination for 1-point tuning)
Color Mode: RGB ratio discrimination
Super-high-speed Mode (SHS)
Operate or reset: 50 µs (only in Contrast Mode)
High-speed Mode (HS)
Operate or reset: 250 µs
Standard Mode (Stnd)
Operate or reset: 1 ms
Giga-power Mode (GIGA)
Operate or reset: 16 ms
Smart Tuning (2-point tuning, full autotuning, or 1-point tuning (1% to 99%)) or manual adjustment
Maximum connectable units
30 Units (When connected to OMRON NJ-series Unit)
Contrast Mode: NO (Light-ON) or NC (Dark-ON)
Color Mode: NO (ON for match: ON for same color as registered color) or NC (ON for mismatch: ON for different color from registered color)
Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay + OFF-delay timer (Counted by 0.1 s in a range of 0.1 to 0.5 ms, by 0.5 ms for 0.5 to 5 ms, and by 1 ms for 5 to 9999 ms. Default: 10 ms, Error: 0.1 ms)
Contrast Mode only
Negative values can be displayed. (Threshold level is shifted.)
Select from initial reset (factory defaults), user reset (saved settings), or bank reset.
Select from OFF (digital display lit), Eco ON (digital display not lit), and Eco LO (digital display dimmed).
Select from banks 1 to 8.
Power tuning level
Set from 100 to 9,999. (The RGB maximum incident level at Smart Tuning is adjusted to the power tuning level.)
Normal, error output, AND output, or OR output
Select from input OFF, tuning, full-auto tuning, emission OFF, bank 1 and 2 switching, bank 1 through 8 switching, or zero reset.
Changing the displays
Threshold level and incident level, channel number and incident level, RGB display and incident level, or bank display and incident level